Mountain Biking - Question about crankset and bottom bracket
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
12-11-10, 01:14 PM
I bent one of the chain rings on my mountain bike, and they are held in by rivets so I have to replace the whole crankset. My question is, right now I have a suntour crankset on my bike and am going to replace it with a shimano crankset will the bottom bracket I be compatible or will I have to buy a shimano one? I don't know the brand of the bottom bracket I have now. Both of the cranksets have the square taper. Thanks for the help
12-11-10, 01:54 PM
You need to know the spindle length in order to keep the correct chainline. Measure the spindle length and get a compatible crank, most cranks will state recommended spindle length, and you may need to replace the BB.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.