Bicycle Mechanics - Hydraulic vs Non-hydraulic Disc Brakes
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
I'm thinking of likely getting a used bike an upgrading at least its brakes if now its gears as well. While doing some research on parts, I came across this site (http://www.torontocycles.com/Selling/Rotors.html). I was wondering how big of a diff hydraulic vs. non-hydraulic disc brakes would make. Thanks in advance.
01-13-11, 11:16 AM
Hydraulic is more work to install and maintain if you need to trim the hoses to size and re-bleed the system. But in use I found them to actually be LESS trouble than cable systems. On cable calipers there's one fixed pad and one that moves. Because the movement is one sided the fixed pad has to be trimmed frequently to sit very close to the rotor. Like REALLY close, basically skimming it. If it isn't then the system requires more lever effort to achieve a given stopping rate. Meanwhile the balanced motion of a two piston hydraulic caliper floats and does this automatically. You still need to align it carefully at installation time but it's not as fussy as the mechanical ones.
On the other hand the hydrualic calipers do get grunged up easier and that can make one of the pistons stick and rub the rotor when it should not be. That means removing the wheel, pads and cleaning the caliper. I use a combination of a small test tube like brush and hot soapy water followed by a blast of brake cleaner. For my all season commuter bike this means doing this about twice a year. For a muddy off road bike it would likely be more like every few days where you ran into serious mud.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.