General Cycling Discussion - Miche hubs and cassettes

Hi all,

I've a question regarding Miche hubs and cassetts. i ha e a Miche splined hub and a Shimano groupset. is it possible to get a Miche splined cassette with Shimano spacing? (Preferably 8 or 10 speed)

I have seen Miche primato cassettes but believe they are Shimano splined, and have also seen Miche spline at. with Campagnolo spacing.

I've looked on the Miche website but it's not very clear

I dont think Miche have their own spline pattern for their freehubs, they use either Campy (8/9/10-speed?) or Shimano. Do you know which spline it is?

I have enquired about the Miche hubs I have (Miche magnum team) and was informed they would only work with Miche Cassettes. I thought this meant a Miche splined cassette? Or do Miche use the same spline as Campagnolo, meaning I need something like those Ambrosio Cassettes that have either Campag splines with Shimano spacing or vise versa?

Or if they only do Campagnolo to fit shimano splined hubs, would it be possible to get a campagnolo cassette (individual sprockets) and buy some shimano spacers?

Thanks in advance,
Paul

Hi all, this is the spine pattern on the Miche Hub. Anyone any ideas?

187707

there is a Campag made driver for their hubs with a steel shimano spline on it.
for 9 speed cassettes.
cost in the states is about $100.

also here thru Merry sales SF Cal, under the IRD brand they get cassettes
made in both C and S spline.

Sorry what do you mean by driver? the freeihub body.

also I'm unsure what c and s spline is.
I've been told it might be and early hyperglide hub


Either way, what i would like to know is if i can get Shimano spaced cassette to fit this spline for 8 speed

or

a Shimano 8/9/10 speed freehub body to fit this hub

thanks in advance,
Paul