General Cycling Discussion - Clear coating... help?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
02-07-11, 12:07 AM
Does anyone know a good clear coat that is also scratch resistant? Where to buy?
02-07-11, 01:40 AM
there is a clear powder coating, where powder coating is done..
Spectrum Powder works is top notch , ,they're in Colorado.
02-07-11, 06:44 PM
I'm specifically looking for a spray clear coat for finishing. I almost found one, but I'm not sure if Abrasion resistant, scratch resistant, and chip guard sprays work the same.
02-08-11, 05:28 AM
I think the only way you will get what is you want in a can is to go to a paint shop. They can prepare a can of 2K clear urethane in a spray bomb. However, If you go that route, you should simply get you primer/sealer, base & clear. If you go mixing types (urethane over lacquer, enamel.etc... ) you could have some disastrous results. If you don't want to mess with the headache, go to an auto body shop. Unless you use a catalyzed clear, you will not get a good scratch/chip resistant paint.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.