BMX - 3 piece cranks

what is the advantage of a 3 piece crank. is it easier to pedal,is it lighter? are they easy to install. i am only 13 and neither me or my dad are real good at fixing bikes.

They're stronger, easier to maintain, easier to install and remove.

thats my question, but wheres the maintanence in a one pice crank, i want 3 pc, but i really wanna know if its worth it.

If you haven't broken your one-piece cranks and you don't plan on doing a lot of really hadr riding, then there's no real reason to switch. Also, keep in mind that you'd need to get new pedals if you got three-piece, because three-piece cranks use 9/16" pedal spindle bosses, unlike one-piecers, which use 1/2".

They are worth it if you are constantly needing to maintain your cranks - that's it.

I grew up on one piece cranks and rode the first 3 years of freestyle on one piece cranks. When I switched, I was having to adjust my one piece cranks every other day and was constantly screwing up the bearings and stuff.

So, if you don't have issues with your one piece cranks, then don't switch them out for three piece. Good three piece cranks are at least $120.00 - though you can get used Profile cranks on eBay for under $100.00 usually. Either way, you will need the new pedals and will need to install them which is fairly difficult for a non-mechanical person the first couple of times.

thats my question, but wheres the maintanence in a one pice crank, i want 3 pc, but i really wanna know if its worth it.

If you ride hard, constantly having to adjust your bb.

They are worth it if you are constantly needing to maintain your cranks - that's it.

Yeah, that pretty much sums it up.

I just bought redline flights, just the way they gleam on my master they are as important as the wheels.......much clown luv

easier to maintain

agreed. i have 3 piece cranks on both my BMX bikes, and they're great. I bent my chainwheel a few days ago, and the replacement part is only like $10. better than replacing the whainwheel and the crank and all. In my opinion it's a good investment.

3 piece cranks r alot lighter, easier 2 work with and 2 install

i wouldnt say lighter because some times there heavier when u have it all put together

if your not a hardcore rider, and u dont have alot of money to spend on a 3-piece just get a strong one piece. they r not as good but they will still hold.

3 piece cranks will add weight to your bike there is no dout about it but they have some very serious advantages. wen i went frum 1 peice to 3 i definetly notics a weight chage on my bike but u cant beat them. the frist and probabaly biggest advantage is that if you get good crank with sealed bearings, unless u are a crazy muther f***ing phyco u will probabally never hafta worry about fixing or gettin new bearings again. another is that they are by far alot stronger and if you are the type of person that bends 1 pc cranks to hell within a week ov getting it like me then u want to make the change. i bent 1 pc cranks like they were made ov plastic but my 3 pc take all the abuse i can shell out. some people might complain about having to swither your pedasl 2 but there is also an advantage there. the pedals you need have a bigger spindle and are much stronger (9/16) and usualy have bettr features compared to they 3/8 of 1 pc pedals as some people call them the overall thing is probabally the look it gives your bike, it just make everyhting look so tough and high quality and also the smoothness you will get frum the bearings. even if u dont ride hard if you have money and u like to ride bike ans build them then get a set of 3 pc cranck you wont regret it

o and by the way im not a newb, iv been riding for about 6 years im just to lazy to change my thing

3 piece cranks will add weight to your bike there is no dout about it but they have some very serious advantages. wen i went frum 1 peice to 3 i definetly notics a weight chage on my bike but u cant beat them. the frist and probabaly biggest advantage is that if you get good crank with sealed bearings, unless u are a crazy muther f***ing phyco u will probabally never hafta worry about fixing or gettin new bearings again. another is that they are by far alot stronger and if you are the type of person that bends 1 pc cranks to hell within a week ov getting it like me then u want to make the change. i bent 1 pc cranks like they were made ov plastic but my 3 pc take all the abuse i can shell out. some people might complain about having to swither your pedasl 2 but there is also an advantage there. the pedals you need have a bigger spindle and are much stronger (9/16) and usualy have bettr features compared to they 3/8 of 1 pc pedals as some people call them the overall thing is probabally the look it gives your bike, it just make everyhting look so tough and high quality and also the smoothness you will get frum the bearings. even if u dont ride hard if you have money and u like to ride bike ans build them then get a set of 3 pc cranck you wont regret it
you mean 1/2" right...

3 piece cranks will add weight to your bike there is no dout about it but they have some very serious advantages. wen i went frum 1 peice to 3 i definetly notics a weight chage on my bike but u cant beat them. the frist and probabaly biggest advantage is that if you get good crank with sealed bearings, unless u are a crazy muther f***ing phyco u will probabally never hafta worry about fixing or gettin new bearings again. another is that they are by far alot stronger and if you are the type of person that bends 1 pc cranks to hell within a week ov getting it like me then u want to make the change. i bent 1 pc cranks like they were made ov plastic but my 3 pc take all the abuse i can shell out. some people might complain about having to swither your pedasl 2 but there is also an advantage there. the pedals you need have a bigger spindle and are much stronger (9/16) and usualy have bettr features compared to they 3/8 of 1 pc pedals as some people call them the overall thing is probabally the look it gives your bike, it just make everyhting look so tough and high quality and also the smoothness you will get frum the bearings. even if u dont ride hard if you have money and u like to ride bike ans build them then get a set of 3 pc cranck you wont regret it


nice bump

no acctually it is 3/8, go to ur local shop and check it out

nice bump
i try

no acctually it is 3/8, go to ur local shop and check it out

One-piece cranks use a 1/2" pedal spindle; three-piecers use 9/16". It's been that way since before I was born, and still is that way.

speaking of bb and cranks....do you guys know what exactly what to do about a ''popping'' crank....everytime i do a manual and i put just a little bit of pressure on the crank...this big like noise(pop) comes from it....i am not peddling when it happens....any ideas?

yuo might have cracked your bearing case or sumthing check

Red Line Flight Cranks!

way tougher and are "bulletproof"...LOL

you need to 'upgrade'

Red Line Flight Cranks!

way tougher and are "bulletproof"...LOL

you need to 'upgrade'
OR NOT. go with either Proflies or Primo cranks...there the best...

nice bump


i try

he wasn't talking to you

he wasn't talking to you
ya, he was...and you just bumped your self....

no he wasnt...he was talking to fuzzy rider (banned), but that part doesnt matter, and i didnt bump it, once again, that was fuzzy rider.

Yes, he was talking to me thank you

hmmmmmm ur name sounds farmiliar......

ya, he was...and you just bumped your self....


i am so glad i am not as stupid as you

i am so glad i am not as stupid as you
thats possible?