Bicycle Mechanics - suntour freewheel tool
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
03-01-11, 04:52 PM
pictured is the freewheel, I am guessing i need the park tool fr2 to remove it but want to make sure. thanks!
the tool http://www.amazon.com/gp/product/B001B6RGYU/ref=ord_cart_shr?ie=UTF8&m=A2TE9IQP68MWQU
yes, you need a SunTour 2-prong tool. Either the park FR-2 or equivalent tool from another maker.
03-01-11, 05:10 PM
gracias FBinNY. you're the man.
BTW- your photo was from so close up that I can't be sure if it's a problem or a result of the exaggerated perspective. But don't be too surprised if the tool won't fit over the locknut.
In any case, be sure to lock the tool firmly to the freewheel with the axle nut, lest it slip and break a prong. Once you've broken the freewheel loose (lots of torque needed) stop and loosen the axle nut to give the freewheel room to move out on the thread.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.