[Dan0930]

I've been riding these pedels now for a few months. They are a great system but do have some draw backs.

1) when gravel or sand sticks to the clean on a dismount etc it tends to clog and make reclipping difficult. maybe lubing the cleat would help?

2) The bolts holding the cleat come loose every now and then and the cleat needs repositioning.

I'm generally very happy with these pedals but reclipping whent he going gets rough can be difficult. i may try the eggbeaters candy pedals.

[The BikeForums Team]

This is an archived thread, you can find the full version of this thread, with images, links and more content here.

Ready to buy? Check out these two online bike stores:
- http://www.nashbar.com (you can find the latest bike nashbar coupons in this thread)
- http://www.performancebike.com (you can find the latest performance bike coupons in this thread)

Cya on the forums,
- The BikeForums Team
- http://www.bikeforums.net

[Surferbruce]

don't try the candys unless you want to ditch the frogs...you'll love em.
as far as lubing your cleats, i use a dry wax lube on my pedals intaed of triflow to keep crap from sticking but the first few times clicking in and out can be slippery.

[steveknight]

use locktite on the cleat bolts and that will take care of it.

[irb_2]

dont use the eggbeater candys. the platform around the actual pedal restricts the movement of the spindle. plus the platform negates the use of the foursided entry of the original eggbeater. I have many friends that use eggbeaters (not the candys) and love them. so if you are going to try anything from the eggbeaters line try the originals. plus the eggbeaters shed mud like none other so any sand or mud or pebbles wont be an issue at all.

[oldskoolboarder]

Something I was told by the Speedplay tech via phone. You're supposed to lube the pedals before every ride. It's not in the instructions but it does mention it on the web FAQ. I do so now w/ both my frogs and X3's. I had a problem shortly after getting frogs where they wouldn't release anymore. Now I lube regularly and it's no problem.

I did 2 races last week that seemed to clog the lugged soles of my Sidis. But I was able to click almost everytime w/o issues.

I've tried the Candy SLs, but it was much harder to unclick the left cleat on a dismount.

[oldskoolboarder]

OK, got to eat my words. Rode Surf City yesterday, probably the most fun course of the year. Off camber runs, couple run ups, some muddy turns, etc. Great course.

And how'd my frogs do? Pretty crappy I'd say. They got stuck w/ mud about every lap, I even had to resort to kicking the mud off, which probably lost me a place or two overall. I'm going back to my Candys which I thought were too tight before. But now that I'm better at the mounts/dismounts, it maybe a moot point now. Plus, I can't fathom racing in the frogs in muddy conditions. For dry conditions, they'll be on the bike hands down. For slop, no way.

[Surferbruce]

don't forget that, depending on which cleat goes on which shoe, the candys release angle changes from 15 to 20 degrees. if you found em stiff make sure you have em set to the easier release.

[oldskoolboarder]

don't forget that, depending on which cleat goes on which shoe, the candys release angle changes from 15 to 20 degrees. if you found em stiff make sure you have em set to the easier release.

Yeah, I don't recall how i set them, but I'm pretty sure I set it for the easiest. I usually do that w/ new style pedals.

I'll also try some dry lube. That seemed REALLY help a lot w/ my frogs.