Bicycle Mechanics - Xt mtb hubs-general question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
04-16-11, 09:52 AM
I bought a Shimano XT mtb hub to build a front wheel for my bike.The hub is new but it seems especially stiff for a new hub.I played with the lockrings and still the hub spins with considerably more resistance than road bike hubs I've encountered.Is this normal for MTB hubs?Will they work thenselves in after a while and turn easier?There is no grinding and they turn smoothly just more stiffly.Thanks for your input.
04-16-11, 10:12 AM
cup and cone hubs will need adjustment when new. adjust the hub after the wheel is built up. xt hubs have 3 seals i believe, atleast the 756 does
04-16-11, 10:27 AM
After you get it built adjust the hub bearings without the outer boots on and puyt a drip of oil on the inside of the seal before you reinstall them.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.