Bicycle Mechanics - Bottom Bracket Advice needed

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.

PDA

View Full Version : Bottom Bracket Advice needed

hudster2001

04-26-11, 05:07 AM

I'm changing the bottom bracket on my bike from the cup and cone type to a sealed unit type, as the cups/bearings are worn and are making a bit of noise.
I know how to repair/overhaul the cups and bearings so that is no problem.

But I've never fited a sealed unit type before, so I don't know what I need to buy to get this done properly. I have a good tool kit, it's just the spares that I don't know about.

Do I just but a sealed unit an thats it, or do I need to buy anything else?

Thanks for any help on this.

CACycling

04-26-11, 09:48 AM

You'll need the BB tool (probably Park BBT-22 if you go Shimano) and, of course, crank puller. That's it.

LeicaLad

04-26-11, 07:52 PM

You don't mention it, but the key is to assure that the new BB spindle is the correct length for your crank set.

Beyond that, these are easy to install. You say you can do loose ball and cups, then this'll be a breeze.

Post photos!