Fifty Plus (50+) - Pulled the triggertoday

On a set of Neuvation R28 SL wheels. Been thinking about it for a while.. They're running an offer now with free shipping thru the 10th. Had to take advantage of it. I'll post my impressions when I get them and ride them for a while.

Dan

Don't know the Neuvation wheels so a your impressions will help once you use them. Let us know what the previous wheels were as well so we can get the correct comparison.

I went from OM wheels to handbuilts early in my riding and I just don't like OM wheels.

Now have about 150 miles on the new wheels, and while I'm sure there is some placebo effect, I'm liking them. Weather has been sucky with a lot of wind, so a little hard to compare. They do seem to have more pop to them and seem easier on hills. One semi-objective test, one of my rides has a relatively steep 1/2 mile downhill. I spin out, so I just tuck and enjoy the ride. I got up to 39 mph on the new wheels, which is faster than I've gotten before. The old wheels were stock Alex AT 450 with Tiagra hubs that came with the bike. Heavy, but I must say durable. I had close to 10,000 miles on them with no problems. I think the new wheels are about 1.5 lbs lighter (~2200 grams v 1520).

Don't know the Neuvation wheels so a your impressions will help once you use them. Let us know what the previous wheels were as well so we can get the correct comparison.

I went from OM wheels to handbuilts early in my riding and I just don't like OM wheels.

I still would like to know the weight on your handbuilts. I went with my DA wheels because I got a great deal and because most of the builders in my area would build me a 1800 gram wheel for about the same price as a set of Mavic Ksyrium SLs. The Dura Ace wheels have proven to be pretty dependable.

I haven't tried the wheels the OP is looking at but two of my friends have just bought some EA90s and to date are very impressed.

Losing 1.5 lbs in your whhes has to feel good! Please keep us updated on how they perform.

Losing 1.5 lbs in your whhes has to feel good!

Feels good to lose 1.5 lbs from the wheels too.

I did not realise that you still had a stock wheels on the bike but your observation on the downhill speed is the same as I found. Speed went up on the downhill by a lot- Corners at speed became curves and average sped over a 30 mile ride went up by 2mph. And on top of that- The lightness of them gives an easier time uphill.

I have always said thet I do not like stock wheels and you have just confirmed the reasons why. Just enjoy them now.

Feels good to lose 1.5 lbs from the wheels too.

Netbook keyboard + open bar at wedding reception = "whhes" :rolleyes:

I still would like to know the weight on your handbuilts. I went with my DA wheels because I got a great deal and because most of the builders in my area would build me a 1800 gram wheel for about the same price as a set of Mavic Ksyrium SLs. The Dura Ace wheels have proven to be pretty dependable.



My handbuilts are Mavic CXP33 rims on 105 hubs and 36 Double butted spokes laced with a 2x cross. The hubs are an older set and are a bit lighter than the current ones and I will have to check the weight. I know they are less than 1800 grms but they cost a lot less than the Krysiums I was offered. The Standard for handbuilts is Open Pro rims on Ultegra Hubs but my wheel builder at the LBS has some unusual ideas occasionally that work. I did manage to have a look at his Bike on sunday and he was using a Fixie in the Time Trial. CXP33 rims with 36 spokes but no idea what hubs so he uses what he sells so if he had confidence- so do I.