mkane77g
05-16-11, 03:53 PM
On the bolt it says torque is 450-550 Kgf cm. These are the aluminum cranks. Does someone know what this is in ft.lbs.? I greased mine:eek:, and it needs to be cleaned and loctited. Keeps comming loose.
Tandem Cycling - FSA torque spec's.
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : FSA torque spec's.
Homeyba
05-16-11, 05:06 PM
1 Kgf/cm = .0723302 ft/lb so 450Kgf/cm = 32.5ft/lbs 550Kgf/cm = 39.8ft/lbs
DubT
05-16-11, 06:49 PM
How old are the cranks? Is the fixing bolt steel or aluminum? If aluminum it should be replaced with a steel one ASAP. Your local LBS can order it.
mkane77g
05-16-11, 08:01 PM
4 yrs. old. I'll stick a magnet on there. Thank's for the replys.
DubT
05-16-11, 08:28 PM
FSA has a good tech support , give them a call if you have any additional questions.
mkane77g
05-16-11, 09:24 PM
:thumb:
VaultGuru
05-17-11, 11:16 AM
This is the conversion site I use
http://www.cleavebooks.co.uk/scol/cctorq.htm
http://www.cleavebooks.co.uk/scol/cctorq.htm
mkane77g
05-17-11, 06:39 PM
Thank's again.