Bicycle Mechanics - how to install Shimano Sora Crankset
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
05-21-11, 03:18 AM
I have a kona Jake 2009 and i have bought a triple shimano sora crankset with bottom bracket
It has come with a spacer but I am not sure were it goes
the shell is 68mm i believe
05-21-11, 05:26 AM
Do you have the tools to remove the old and install the new bottom bracket? I have no idea what spacer you have since Sora was a road group and the bottom bracket was intended for a 68 mm shell. Spacers typically come with cranks that can go on either 68 or 73 mm shell widths.
05-21-11, 06:19 AM
is this the sora crank with the integrated spindle? if yes then the spacer goes on the non drive side of the spindle
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.