geej
06-26-11, 09:11 PM
was taking an old bb out of an old frame. it did what it needed to do.
208286
208286
Singlespeed & Fixed Gear - bb pin spanner
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : bb pin spanner
Squirrelli
06-26-11, 09:22 PM
That's kind of smart, kudos! :D
frantik
06-26-11, 10:07 PM
hey, it works :)
post here: http://www.bikeforums.net/showthread.php/316561-Hints-and-tricks-thread
post here: http://www.bikeforums.net/showthread.php/316561-Hints-and-tricks-thread
geej
06-26-11, 10:56 PM
hey, it works :)
post here: http://www.bikeforums.net/showthread.php/316561-Hints-and-tricks-thread
will do!
post here: http://www.bikeforums.net/showthread.php/316561-Hints-and-tricks-thread
will do!
docboyd
06-27-11, 03:24 AM
I can dig it, I use an old pipe wrench with welded and ground tabs as a lockring wrench. Not pretty but works marvelously.
EssEllSee
06-27-11, 09:21 AM
Smart
zacked
06-27-11, 10:45 AM
I've always just used old spokes. Unless the BB is seized in you don't need much force.
rithem
06-27-11, 12:48 PM
they (http://www.parktool.com/product/crank-and-bottom-bracket-wrench-hcw-4) make a tool for that