Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.scirocco
07-28-11, 04:14 AM
Does anyone have any experience with the KCNC BB30 to Shimano 24mm crank adaptor? This gadget includes the bearings with the 42mm dimension BB30 surface and 24mm Hollowtech crank surface all in one unit.
I have a BB30 road frame coming that I need to run a DA7900 crank in, and have been looking at the various adaptors available. I like the look of this unit, if for no other reason than that the press-fit is achieved by screwing the two cups together with the regular Hollowtech tool. Neat. But that's a moot point if it's a poor design or is unreliable or the bearings only last a month or something.
Appreciate comments. Thanks.
https://clee-cycles.co.uk/shop_images/kcnc//bb/bb30-rdbk.jpg
I have a BB30 road frame coming that I need to run a DA7900 crank in, and have been looking at the various adaptors available. I like the look of this unit, if for no other reason than that the press-fit is achieved by screwing the two cups together with the regular Hollowtech tool. Neat. But that's a moot point if it's a poor design or is unreliable or the bearings only last a month or something.
Appreciate comments. Thanks.
https://clee-cycles.co.uk/shop_images/kcnc//bb/bb30-rdbk.jpg