Bicycle Mechanics - race face onto shimano cranks
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
07-28-11, 12:30 PM
Would I be ok with putting race face chain rings to put on an older shimano crank
07-28-11, 12:33 PM
Match the Bolt circle diameter.
07-28-11, 12:46 PM
As long as they have the same number of bolts and the BCD, they will work fine, that's what they are designed for being aftermarket rings.
07-28-11, 12:54 PM
As others have pointed out, if the BDC and hole pattern matches, they'll fit.
I ran some Race Face rings on my MTB a couple of years ago, and they shifted terribly. Only time that I've experienced chainsuck on that bike. I installed a new chain and cassette when I installed the rings, so everything was fresh.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.