Tandem Cycling - Fork shudder.
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
08-10-11, 06:23 AM
Our Thorn Adventure has a rigid steel fork, the front brake is a v-brake with XT cartridge style pads, wheel has alloy rim. Using both brakes when doing low speed u-turns can make the fork shudder badly. The pads are only 1/4 worn perhaps - I'm wondering if I should try softer pads, or maybe harder ones.
Anyone else had this problem? Any ideas or feedback?
08-10-11, 06:36 AM
Technique suggestion: Only use the rear brake when you're making U-turns or other very slow-speed manuevers... use constant braking and increase/decrease brake lever force to work against pedal pressure: makes all the difference in the world. Master it and you'll find you can trackstand your tandem at short stops if you haven't already mastered that.
As for the front brake studder, you might want to:
a. Adjust your headset, i.e., make sure there isn't any play
b. Clean your front rim brake track with some alcohol on a scrunge pad.
08-10-11, 03:40 PM
Also: check headset for pitted race/bearings.
08-11-11, 02:19 PM
+1 on the headset.
get off the bike, hold it by the handlebars, and lock the front brake. Push the bike forward until the rear wheel lifts off the ground. If there's play in the headset you'll feel it as the bike rolls up.
08-11-11, 08:05 PM
A couple of years ago on our old C'dale tandem it was a headset.
On my new'ish cross bike ('07 actually) with an Eaton EC90 Carbon fork it was a set of Avid Short 4's canti brakes that were ill designed. Upgrades to some 6's and all fork chatter was completely eliminated.
08-12-11, 05:56 AM
thanks all. will check. R
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.