Classic & Vintage - Can Anyone Identify These Campagnolo Hubs?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
10-01-11, 02:17 AM
I'm not very well up on identifying Campagnolo hubs so any help is much appreciated. Both hubs are 32 hole, not sure what else you need to know about them, I hope the pics do the talking! Thanks
10-01-11, 02:38 AM
Forgot to mention their on Mavic SUP rims, might help
10-01-11, 05:41 AM
No, the rims and spokes are irrelevant. Any Campy hub could have any rim built on it. Same for the number of spoke holes, the hubs were supplied with any drilling the bike manufacturer specified.
More info needed: How many speeds? What is the freewheel made of? (need to remove the cassette to see this) Maybe some pictures of the freewheel? Can you tell anything about the bearings? Is there a little flat steel clip around the middle of the hub that covers up a little oil hole (this is actually a useless hole; keep it covered and don't add oil to lube the hub).
10-01-11, 06:16 AM
Looks like my mid 90s 8 speed Mirage (or slightly higher) but the steel QR skewer means towards the lower end.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.