Plow13
10-10-11, 05:44 PM
I am looking to do warmups on my trainer before cross races and I have a powertap wheel from my 10speed...My cross bike is 9speed...Its just going to be used in the trainer..is it going to hurt it at all?
General Cycling Discussion - 10sp on 9psd?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : 10sp on 9psd?
Homebrew01
10-12-11, 07:56 AM
It won't shift well, unless you put a 9 speed cassette on the pt wheel. If you just leave it in 1 gear for warming up, that might be ok as long as the wider 9 speed chain is ok on the narrower 10 speed cassette. try it and see
punkncat
10-12-11, 10:52 PM
I don't think it will set on the cog. Isn't the 9 sp chain width wider than the cog spacing on a 10 sp cassette?