RFC
11-14-11, 09:25 PM
I did a cursory search on the internets and didn't find anything. I have a new project coming and the Nitto is a must.:)
Classic & Vintage - Does Nitto still make a 90 degree quill stem?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Does Nitto still make a 90 degree quill stem?
3speed
11-14-11, 09:48 PM
Maybe this one? I'm not exactly sure, but that's what came up when I just did a quick search.
http://www.thebikebiz.com/product_p/trk-stem-nitto01.htm
http://www.thebikebiz.com/product_p/trk-stem-nitto01.htm
jonsan
11-14-11, 10:18 PM
Nitto Dynamic II:
http://www.benscycle.net/index.php?main_page=index&cPath=188_263_1332_1820
http://www.benscycle.net/index.php?main_page=index&cPath=188_263_1332_1820
Sixty Fiver
11-14-11, 10:31 PM
Nitto Dynamic II:
http://www.benscycle.net/index.php?main_page=index&cPath=188_263_1332_1820
That is technically a 0 degree stem with 0 rise and 0 drop.
http://www.benscycle.net/index.php?main_page=index&cPath=188_263_1332_1820
That is technically a 0 degree stem with 0 rise and 0 drop.
RFC
11-15-11, 12:34 AM
I need something like this:
http://www.cyclofiend.com/cc/2006/cc074-iankersey0106.html
http://www.cyclofiend.com/cc/2006/cc074-iankersey0106.html
LesterOfPuppets
11-15-11, 01:25 AM
Dynamic II that jonsan mentioned is 90°, unfortunately 25.4mm clamp.
Why not just run a 73° stem (like Technomic, perhaps), assuming your headtube is tall enough to accept it?
Why not just run a 73° stem (like Technomic, perhaps), assuming your headtube is tall enough to accept it?
THEJAPINO
11-15-11, 01:28 AM
I have that stem! It's an SR that had bad anodizing so I stripped and polished it. I actually have two other 0* stems. One is an 85mm chromoly stem in silver and the other one is an 80mm Nitto Dynamic II in rough shape. What reach are you looking for? Here is a pic of the SR:
http://i45.photobucket.com/albums/f61/thejapino/0841ec6d.jpg
http://i45.photobucket.com/albums/f61/thejapino/0841ec6d.jpg
LesterOfPuppets
11-15-11, 01:31 AM
Sooo shiny! Vast improvement over original finish, JAP!
Bianchigirll
11-15-11, 06:07 AM
Thanks for posting this RFC!! I have been wanting a few of those stems myself since I used up the few I had lying around.
what is wrong with the 25.4 clamp? the Nitto B115 bars are perfect fit with this. Ebike stop sells (or sold) and inexpensive Demension branded 'anotomic' shaped bar in 25.4 if they are your preference. also the ones 3Speed posted is 26.0
there was always something I did not like about the Technomic, perhaps because I mostly saw them on small bikes and the huge stem sticking out looked awkward or something.
what is wrong with the 25.4 clamp? the Nitto B115 bars are perfect fit with this. Ebike stop sells (or sold) and inexpensive Demension branded 'anotomic' shaped bar in 25.4 if they are your preference. also the ones 3Speed posted is 26.0
there was always something I did not like about the Technomic, perhaps because I mostly saw them on small bikes and the huge stem sticking out looked awkward or something.
Maddox
11-16-11, 12:09 AM
I need something like this:
http://www.cyclofiend.com/cc/2006/cc074-iankersey0106.html
That bike has an axe on it.
Manliest bike ever?
http://www.cyclofiend.com/cc/2006/cc074-iankersey0106.html
That bike has an axe on it.
Manliest bike ever?
RFC
11-16-11, 12:23 AM
That bike has an axe on it.
Manliest bike ever?
Pretty much. Works well on Zombies.
Manliest bike ever?
Pretty much. Works well on Zombies.