Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.joepaiva
12-11-11, 07:45 PM
Years ago, I built bikes with old parts. It was huge fun, but then life got in the way (school, job, etc.) 30 years later, I am starting to build frames/bikes again. Now though, my goal is to build side by side tandems and velomobiles that my wife and kids will actually ride in with me. So here is my first newbie/old man (the times have changed) question:
- I can do the math and calculate bottom tube sizes, but does anyone have any "real world" experience or rules of thumb for sizing 4130 bottom tubes for LWB recumbent bikes?
Stiffness will obviously not be an issue for a side by side tandem going 5-10 mph around the neighborhood or down a flat bike path; I just don't want to add any more weight than absolutely required, but don't want to have a "bent bent" every time I hit a small bump in the road...
Thanks in advance for any help/advice,
Joe P.
- I can do the math and calculate bottom tube sizes, but does anyone have any "real world" experience or rules of thumb for sizing 4130 bottom tubes for LWB recumbent bikes?
Stiffness will obviously not be an issue for a side by side tandem going 5-10 mph around the neighborhood or down a flat bike path; I just don't want to add any more weight than absolutely required, but don't want to have a "bent bent" every time I hit a small bump in the road...
Thanks in advance for any help/advice,
Joe P.