nijotak
01-08-12, 09:34 PM
I have a dahon speed pro tt and i want to change the handle bars into the road bike ones. would it work?
Folding Bikes - handle bar
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : handle bar
Dynocoaster
01-09-12, 07:17 AM
This is from Thors site on a Helios drop bar conversion http://www.thorusa.com/dahon/technical/heliosdropbarconversion.htm
It looks like you will just need the drop bars.
It looks like you will just need the drop bars.
AEO
01-09-12, 10:03 AM
measure the bar clamp area. It should be 25.4mm.
If it is, then buy a 25.4mm clamp handlebar and you're set.
I think nitto is about the only maker that even offers that size anymore.
or buy the helios conversion piece to use 26mm bars.
If the clamp area is 26mm, then it should be easier to find drop bars in that size.
If it is, then buy a 25.4mm clamp handlebar and you're set.
I think nitto is about the only maker that even offers that size anymore.
or buy the helios conversion piece to use 26mm bars.
If the clamp area is 26mm, then it should be easier to find drop bars in that size.