Foo - Sewing/knitting ?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
I have a hole in the elbow of my second favorite sweater. I bought some suede patches because I'm not giving up on my sweater.
How does one attach leather patches to the elbows of a sweater?
Whip stitch it with yarn, do you use leather thread? I have no idea.
There are already little holes punched into the patches so I don't need an awl. Beyond that I'm at a loss.
Thanks,
--A
http://www.youtube.com/watch?v=3SUR1ja3Rf4
CbadRider
01-26-12, 04:00 PM
^^That's a good video. You should sew up the hole in the sweater before you add the patch so it doesn't unravel any further.
Thank y'all. I think with that I'm good to give it a try.
overthehillmedi
01-26-12, 06:35 PM
Duct tape and crazy glue.
Duct tape and crazy glue.
That's only if the sweater is European and weighs the same as a duck.
<3 2 Ride
01-26-12, 06:55 PM
^^That's a good video. You should sew up the hole in the sweater before you add the patch so it doesn't unravel any further.
I thought exactly this as I read your post. The cuff on my favorite sweater is coming apart and I've been trying to figure out how to fix that. Pretty sure it won't be quite as easy as the elbow on yours. Good luck!
cyclokitty
01-26-12, 10:29 PM
I whip stitch using thread around the hole first to keep the yarn from unravelling some more. The I put a ping pong ball or a sewing egg that is bigger than the hole under the fabric. Then with similar colored yarn make long stitches from one side of the hold tomthe other. The stitches aren't tight and squeezing the hole shut, just lying there. Then turn the fabric and start weaving new threads under and over the yarn. Try and make the weaving as snug as possible. Then lightly iron some fusing material on the inside of the newly darned area for strength. As long as the hole isn't some crazy huge hole,'the repair will look alright.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.