Bicycle Mechanics - DIY aero bike frame repair stand

Does anyone have an repair stand that will work with an aero frame. Willing to share photos?

Thanks

The Pro race mechanics use stands that just hold up the BB,
by the shell underneath .. with a bit of clearance for cables to move..

and support the fork by the dropouts where they removed the wheel.

You can buy pickup bed bike fork dropout clamp mount pieces
to do that latter part.

Here is the type of stand fietsbob was referring to: http://www.parktool.com/product/team-race-stand-prs-20

A home made version could be constructed using a truck or SUV/Van interior fork mount clamp like this: http://www.jensonusa.com/Truck-Bed-Racks/Rocky-Mounts-Clutch-Fork-Bed mounted on a board or other support and an under bottom bracket support fabricated. Instead of a commercial fork mount, a pair of defunct qr hubs could be U-bolted to a support board so you could clamp either the fork or rear dropouts.

For aero bikes u need a stand that can hold the bike from the fork or rear end and BB.

Sorry for bringing an old pst back but I just picked up a bike with an aero seat post and have a Feedback Mechanics stand. Has any one used this adaptor?
Giant ISP Seatpost Clamp Adaptor (http://www.ebay.com/itm/200883858089?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649)

the new style Park Tools clamp will hold just about anything, and is really nice.
http://www.parktool.com/product/professional-micro-adjust-repair-stand-clamp-100-5d

I got the 'wall mount' stand and put it on a pole thats next to my outdoor work area
http://www.parktool.com/uploads/thumbnails/uploads/products/a5de22453187ca5f832aeb278aa77103e73faefb_430x390.jpg

If you're working at home in a garage or basement with exposed rafters you can just run ropes over the beams and hang the bike by the seat and handlebar, using improvised hooks you can form from heavy wire. This is the type or "repair stand" favored by professional mechanics all over the world.

For aero bikes u need a stand that can hold the bike from the fork or rear end and BB.

either/or but not both, .. at the same time..

Sorry for bringing an old pst back but I just picked up a bike with an aero seat post and have a Feedback Mechanics stand. Has any one used this adaptor?
Giant ISP Seatpost Clamp Adaptor (http://www.ebay.com/itm/200883858089?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649)
Yep. I have a Giant Defy Advanced with the teardrop-shaped seatpost. Not a round tube on that bike. The adapter kit works great. It also has adapters for a couple diameters of round seatposts also. There's some on sale on EBay right now.