Singlespeed & Fixed Gear - suicide hubs- basic question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
can someone briefly explain what a suicide hub is and why it's called that?
i'm concerned because i just bought a bike off ebay and a friend of mine mentioned i should watch for that.
is there any way to tell what kind of hub is on there?
is it always a bad thing?
clearly, this is my first fixed-gear. thanks for any help.
12-18-04, 01:41 PM
When people say "suicide hub" they mean a hub that has a cog screwed onto a freewheel with no lockring. This is obviously dangerous, because if you apply some backpressure, you can spin the cog right off the freewheel and you will no longer have a way to slow down your bike. Of course, if you ride with brakes, this isn't as much of a concern.
12-18-04, 01:44 PM
even if you put a lockring on a non-fixed gear hub you can get in trouble, as it's possible to spin the cog AND the lockring off.
Paul And Pista
12-18-04, 01:45 PM
I thought that suicide hubs also included freewheel hubs that have a cog scewed on and a lockring that's held on with locktite. But maybe I'm wrong. Plenty of people use the locking and locktite method, but it's not such a great idea. If you do, definitely use a break or two.
12-18-04, 01:46 PM
I've never actually heard it referred to that until just a few days ago, here, but it's an old road hub with thread-on freewheel threads. You thread on the track cog...optional components are a bottom bracket lock ring and/or locktite (pick your color). The problem is all the threads are in the same direction. Pedaling forward tightens and backpressure...well...
A proper track hub has a set of clockwise threads for the cog and a smaller diameter set of threads running counter-clockwise to thread a track lockring on. Forward pedaling tightens the cog while backpressure "unthreads" (in reality, there should be no play) it against the lock ring which then tightens down in its own threads.
And even if you have a brake it can still be a bad scene. I threw a chain (which is essentially what happens if you unthread your cog) and ended up facedown in the middle of a major intersection when the chain jammed the wheel.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.