JSNYC
02-12-12, 07:00 PM
I'm using a Fizik Cyrano for the captain post. Try as I might I can't get the adjustable Control Tech stoker stem with shim to fit. I widened the shim about 1/32" and the shim itself barely fits (very snugly), but once I wedge the shim inside the stem's clamp interface, it shrinks just a tad--to the point i can't get the Cyrano post in there more than 2".
I've tried tapping in with rubber mallet, lining all surfaces w/grease, etc. No go. Either the Cyrano is spot-on 27.2 (like a Thompson, which are amazingly accurate diameter) and the stem w/shim is off, or vice versa. I don't have calipers to measure hence the guessing.
Thanks for any tips.
I've tried tapping in with rubber mallet, lining all surfaces w/grease, etc. No go. Either the Cyrano is spot-on 27.2 (like a Thompson, which are amazingly accurate diameter) and the stem w/shim is off, or vice versa. I don't have calipers to measure hence the guessing.
Thanks for any tips.
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.