Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.Catchrob1
02-13-12, 05:49 PM
I am working on a bike kit project I put together myself. So far things have going okay, but the 36V 10AH Headway LiFePO4 Battery 38120 E Bike Battery Pack has a different output connector. It’s a 4 Pin male Cannon plug, the 1,2 pins are neg. ,the 3,4, are plus. I do have the female connector but it is not wire on the system. My question is what kind of clamps do I need for the two bare wires hanging from the wiring harness, and does that mean all have to do is find the right wire (+or-) to put to the 1,2, and the other to the 3,4. I had seen pictures online with similar products with only two going in the female 4 pin connector. But no diagrams to actually see how it’s wired up. Can anyone advise on this