Touring - Cannondale T400 fork crown race size 27.0 or 26.4?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
05-17-12, 02:02 PM
I have an old cannondale t400 and I need to replace the headset, id rather not disassemble my bike to find out, but If i don't find the size soon I might have to.
So basically I need to order a new headset, its a 1" threaded fork, but I don't know if cannondale used ISO or JIS sizing for their fork crown race.
27.0 or 26.4mm?
05-18-12, 07:03 AM
You might try posting this in C&V. Some vintage C'dale experts there.
I just changed out the headset in my 94 T700 due to indexing of the old headset. I used the 26.4 mm Tange Falcon FL250C model with sealed bearings. The stack height was just right. I used a homemade headset press and just removed the old headset and crown race using a tap and a hammer. To press in the crown race, I used a PVC tube and hammered on the tube to get it to go in.
Hope this helps.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.