Singlespeed & Fixed Gear - treadless stem
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
can i use a treadless stem on a treaded steerer, i dont want to use that quill adapter.
01-06-05, 03:22 PM
Why don't you want to use a quill adapter?
I would worry about clamping to threads. Instead of the stem tightening on a nice smooth piece of metal with lots of contact area, you're limiting your contact to the ridges of the threads. While the threads would probably smash down with enough clamping force, you'd then have a smaller diameter at the stem than the original fork. Might make keeping the stem tight problematic.
that make good sense. i wont do it .
Did it and still doing it on Sir Walter. Niot a problem and have a couple hundred miles on it. The threads don't smash down, as the last time I changed the stem they were still very much intact. Why did I do it? It was originally a cheap-as-i-could-build-it project and I had numerous threadless stems and an extra HS in the box and the fork had enough length to the steere tube to try it. Have not found a reason to change it yet.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.