Classic & Vintage - Clamp on chainstay cable stop question

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
tmh657
07-15-12, 12:02 PM
This is totally newb but I must get the expert advice. I have this frame and it does not have the braze on cable stop. I need to get the clamp on thingamabob. Are they pretty much all the same? I am guessing when you clamp it on tight enough to work the paint underneath will get a bit messed up and/or faded.

Best place to get one? Other than the parts drawer of many C&V members. I see one on ebay for $5.99 http://www.ebay.com/itm/Shimano-Chainstay-Cable-Housing-Stop-New-5-8-/360470388141?pt=LH_DefaultDomain_0&hash=item53edb59dad#ht_524wt_1004

Do some have a rubber part or are they all just metal on metal. Thanks for not laughing.

Chris_in_Miami
07-15-12, 12:32 PM
You can protect the paint somewhat with a strip of thin hard plastic, I've used a sheet of mylar that came as protective packaging on an LCD television screen. The clamp in the link probably won't mar the paint at all if it's fully cured or factory paint.
rootboy
07-15-12, 01:07 PM
For clamp on parts like that, shifters, pump clips, front derailleurs, etc., I've taken to coating the inside of the clamp with Plastidip or similar.