Tandem Cycling - Burley Duet year made?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Burley Duet year made?

cheg
01-15-05, 11:12 PM
My wife and I bought a tandem today to train for possibly doing the Seattle to Portland ride this year. I'm curoius what year this one was made. The wheels are 700C. It has:

Frame: TrueTemper CW 4130
Rear Derailleur: Suntour XCE
Front Derailleur: Suntour XCE
Shifters: Suntour Bar Con Power Shifters

Cranks: Suigino GP

Brake Levers: Suntour Blaze BRS
Brakes: Dia-Compe 984 Cantilever
Drag brake: Arai Drum

Seatposts: Sakae
Saddles: Avocet

Stems: Sakae
Front Bars: Sakae drop
Rear Bars: Belleri drop

Headset: Tioga Avenger Oversized

Hubs: Suzue
Wheels: 700C

I think the derailleurs put it between 1990 and 1993. Thanks for any help you can give.

TandemGeek
01-16-05, 06:17 PM
It's at least a '91 as I believe this would have been the first year that Burley began using the new Tioga Avenger ovesized (OS) headset (1 1/8"). All the other components sound about right for a '91 -- and probably for a '92 as well. Rims would most likely be Sun Mistral with 48 spokes. Again, when all else fails send an Email to the builder with the Serial Number and they can tell you.
cheg
01-16-05, 08:01 PM
It's at least a '91 as I believe this would have been the first year that Burley began using the new Tioga Avenger ovesized (OS) headset (1 1/8"). All the other components sound about right for a '91 -- and probably for a '92 as well. Rims would most likely be Sun Mistral with 48 spokes. Again, when all else fails send an Email to the builder with the Serial Number and they can tell you.

Thanks for the info.
Where is the serial number? I couldn't find one.

Today I switched it to flat bars and grip shifters and mounted rack, fenders, and lights. Just need to get some decent saddles and we're ready to roll for < $500.

TandemGeek
01-16-05, 08:17 PM
It should be located on the right side of the right rear drop-out... probably partially hidden by the axle nut.