Classic & Vintage - 1982 Nishiki Cresta

http://farm9.staticflickr.com/8433/7817444724_2597e35235_b.jpg (http://www.flickr.com/photos/76883232@N02/7817444724/)

Well, where to begin? I started this project 15 months ago in May 2011. At the time I realized I did not have a functional bicycle that I could ride with my kids in the neighborhood or go to the local market with. I did have a neglected 1982 Nishiki Cresta in my storage shed however. I determined that I would restore the bike to working order in time for my 50th birthday in June 2012.

I bought this bike new from the Tempe Bicycle shop in Arizona, back when the store was located on Mill Ave. I was 20 years old when I bought it. I don't know why I picked this one, I guess I liked the color, it had a rear rack, and it had good lines. I rode the heck out of it, using it as my daily commuter to and from the College of Architecture at Arizona State University. I loved this bike.

http://farm9.staticflickr.com/8425/7817442990_1dbb4ea37d_b.jpg (http://www.flickr.com/photos/76883232@N02/7817442990/)

I also came to appreciate that it was a touring bike, and I joined a local bike touring club to learn about the sport, and ultimately completed a four day ride from Flagstaff to Phoenix Arizona in 1984.

When I started the project, I knew little about bicycle mechanics. But I dove right in and completely stripped the bike of all its components down to the frame and fork. Using the internet as my guide, I began to educate myself about the bike and what the possibilities were for it. This particular bike was a mid-level touring bike, nothing really special about the components. I wanted to maintain the spirit of a touring bike, but that view evolved during the project.

http://farm9.staticflickr.com/8430/7817445202_dffab4840e_b.jpg (http://www.flickr.com/photos/76883232@N02/7817445202/)


I decided I would replace any part with an upgraded component by the same manufacturer if possible. I would use Japanese components and parts wherever I could (although I ended up with a French saddle, a German bottom bracket, and American wheel hubs and rims).

I also wanted a bomber, state of the art drivetrain and wheelset. I replaced the original 27" wheels with 700c Velocity Dyad rims laced to Phil Wood Touring Hubs, 36 spokes up front and 40 spokes on the rear wheel. I replaced the 5-speed Suntour freewheel with a 7 speed NOS Suntour Winner Ultra, coldset the frame from 126mm to 130mm, and installed an SKF Heavy Duty Cartridge bottom bracket.

http://farm9.staticflickr.com/8433/7817441582_dd9f9c5de3_b.jpg (http://www.flickr.com/photos/76883232@N02/7817441582/)


I replaced the original Sugino triple crankset with a new Sugino XD600 triple crankset for a better gear ratio (at 50 I need that 26 granny gear!).

http://farm9.staticflickr.com/8284/7817458908_9d2e3efd04_b.jpg (http://www.flickr.com/photos/76883232@N02/7817458908/)


I found a beautiful set of Specialized Touring pedals on eBay.

http://farm9.staticflickr.com/8295/7817454208_d48878dcd9_b.jpg (http://www.flickr.com/photos/76883232@N02/7817454208/)


The real find, the one that set the tone for the bike early on, were the gorgeous NOS Suntour Superbe brakes I found on eBay.

http://farm9.staticflickr.com/8444/7817439422_6d33e54a6c_b.jpg (http://www.flickr.com/photos/76883232@N02/7817439422/)


The brake levers are NOS Suntour Superbe with Velo Orange mettalic braided cables. Nitto Noodle handlebar, Newbaums tape and Nitto Technomic stem.

http://farm8.staticflickr.com/7119/7817438912_16c7cc6d16_b.jpg (http://www.flickr.com/photos/76883232@N02/7817438912/)


I replaced the seat post with a NOS SR Laprade, and the saddle is a Gilles Berthoud Touring model.

http://farm9.staticflickr.com/8286/7817440510_af863fa4de_b.jpg (http://www.flickr.com/photos/76883232@N02/7817440510/)


I installed Honjo LePaon fenders and a Nitto Mark's Rack up front. I plan to add a Nitto R-14 to the rear with a Spanninga Pixeo fender mounted taillight.

http://farm9.staticflickr.com/8428/7817441018_d0d286e133_b.jpg (http://www.flickr.com/photos/76883232@N02/7817441018/)


So, what did I end up with? The only original parts are the frame and fork (original paint and decals), and the Suntour Cyclone MK-II front and rear deraillers. But to me the spirit of the bike is still there. The ride quality is unbelievably smooth, firm and quiet. Its a joy to ride. And while I can certainly set the bike up for fully loaded touring, its current form is more like a rando bike or credit card tourer.

I've had a blast working on this bike, and for better or worse, I got the bug to do another project. Maybe a high end Nishiki roadbike......

That is gorgeous bike you've built up. Most likely many of us(myself included) here on C&V would love to find one like it to build up, most likely very similar to yours.

Brian

Great Work! Looks fantastic and it should be set for another 30 years! Well done!

wow, what a wonderful build! I owned a Cresta for a short time, it was a little too big but the few times I rode it I was very impressed. I love the clean fender lines and the stunning photography as well.

Scott

Thanks for the compliments! The fenders were a bear to install but they turned out nice.

Great Job! I too desire a touring bike. Maybe one day.

I do believe that is the most uniform fender line I have ever seen.

http://farm9.staticflickr.com/8433/7817441582_dd9f9c5de3_b.jpg

Thanks! Southpaw Boston (somervillebikes ?) who posts on this forum inspired me. They know clean fender lines!

Wonderful bike! Congrats on a great job restoring/updating her, it's gorgeous...one of the nicer tourers showcased on here.

I love the build very well done maybe a bit over done in places but I just love it. The higher end Nishiki frames from the late 70's early 80's are way underated tubing and build wise they are on par with nearly any cro-mo frame every built.

Wow, nice job... really nice job with those fenders.

The quality of the frameset is what justified going "all in" on this build up. That, and the sentimental attachement I have for it. Here are a few more pictures.

http://farm9.staticflickr.com/8422/7817437914_7744a03ea1_b.jpg (http://www.flickr.com/photos/76883232@N02/7817437914/)
IMG_4660 (http://www.flickr.com/photos/76883232@N02/7817437914/) by Craig Stoffel (http://www.flickr.com/people/76883232@N02/), on Flickr

http://farm9.staticflickr.com/8293/7817452800_27b93f3e4f_b.jpg (http://www.flickr.com/photos/76883232@N02/7817452800/)
IMG_4632 (http://www.flickr.com/photos/76883232@N02/7817452800/) by Craig Stoffel (http://www.flickr.com/people/76883232@N02/), on Flickr

http://farm8.staticflickr.com/7279/7817442610_9418bc0d92_b.jpg (http://www.flickr.com/photos/76883232@N02/7817442610/)
IMG_4651 (http://www.flickr.com/photos/76883232@N02/7817442610/) by Craig Stoffel (http://www.flickr.com/people/76883232@N02/), on Flickr

Most excellent! Like what you have done with the Cresta in all respects. Enjoy.

Beautiful build! Just posted this in the Vintage Touring Thread below yours. Mine is an 85 and not in touring mode but more town bike mode.

https://lh4.googleusercontent.com/-s7hKBZ5aQ6A/UDK6jx72LrI/AAAAAAAABdY/rujQS9Z0uW8/s1148/IMG_0830.jpg

http://farm9.staticflickr.com/8293/7817452800_27b93f3e4f_b.jpg (http://www.flickr.com/photos/76883232@N02/7817452800/)
IMG_4632 (http://www.flickr.com/photos/76883232@N02/7817452800/) by Craig Stoffel (http://www.flickr.com/people/76883232@N02/), on Flickr


How do you like the SKF bottom bracket? I have used Shimano UN72 for years, but they seem to have long since dropped that in favor of cheaper versions.

very nice! well-executed build and very clean all over.

bit of trivia: did you know that Toyota made a luxury sedan called the Cresta? It was for sale in Japan only in the early 80's:
http://upload.wikimedia.org/wikipedia/commons/thumb/7/7f/1996-1998_Toyota_Cresta.jpg/800px-1996-1998_Toyota_Cresta.jpg

Beautiful Cresta! I had one once but sold it to get an '85 Trek 520. If mine had looked like yours currently does, I would have kept it!

http://farm9.staticflickr.com/8293/7817452800_27b93f3e4f_b.jpg (http://www.flickr.com/photos/76883232@N02/7817452800/)
IMG_4632 (http://www.flickr.com/photos/76883232@N02/7817452800/) by Craig Stoffel (http://www.flickr.com/people/76883232@N02/), on Flickr


How do you like the SKF bottom bracket? I have used Shimano UN72 for years, but they seem to have long since dropped that in favor of cheaper versions.


I like the SKF bottom bracket so far. When I opened up the original cup and cone BB I found one of the cups was badly damaged. Removing the fixed side cup took a huge effort (had to improvise a Sheldon Brown tool, copious amounts of PB Blaster and a long breaker bar). I planned to replace it with a NOS Suntour Superbe but after the epic struggle to get the original BB off the bike, I decided to go with a cartridge unit. I figure the BB is one of the top three bearing sets on a bike (along with the front and rear hubs) and worth the investment. I wanted to install it and forget about it. The BB is also a component that can be upgraded to a modern part and not significantly change the look of a vintage bike.

I looked at the Phil Wood BB but ultimately went with the SKF because I appreciated the design effort that went into it and also it was available in the 113mm size to fit the Sugino crankset (not a knock on Phil Wood, they are also top tier bearings). I expect the SKF BB to last a long, long time.

very nice! well-executed build and very clean all over.

bit of trivia: did you know that Toyota made a luxury sedan called the Cresta? It was for sale in Japan only in the early 80's:
http://upload.wikimedia.org/wikipedia/commons/thumb/7/7f/1996-1998_Toyota_Cresta.jpg/800px-1996-1998_Toyota_Cresta.jpg


Thanks, and love the trivia! I had never heard of a Toyota Cresta before. Another interesting fact: All the letters in the name C-R-E-S-T-A are also contained in my first and last name. Weird....:)

would love to see the price list on this one. i'd guess $1300. you guys are all too modest (or something) to share though. and that's cool too. me? i'm not at all embarrassed about the excessive cash i spend on a bike. anyway, beautiful nishiki.

Beautiful bikes.

Beautiful bikes.

I am in the middle of a restoration myself with a view to doing coast to coast (UK) in June.

http://i879.photobucket.com/albums/ab358/Everest30/DSC03038-1.jpg

Did thousands of miles on a steel bike when I grew up and loved it ever since.. only just changed to ALU/Carbon toy for riding solo but ALWAYS steel for enjoyable rides with wife and kids.

Fantastic quality re-build. Very little shown on the tinternet about these bikes.

Mine is the Cresta GT Touring Series. It has the additional lugs for downshifters, eyelets for panniers front and rear.

nice bump. the OP's bike is perfect. he killed it.

I had an 82 Cresta as well, in a dark metallic charcoal gray. It was my first road bike. Unfortunately it was about 3 cm too small, so it eventually had to go. Beautiful bike, great job on the build.

Nice build. I restored mine a couple of years ago. I need to get the proper decals on it though.
http://farm5.staticflickr.com/4114/4949187826_b5eda1858b.jpg

http://farm5.staticflickr.com/4126/4949187858_f61e2bfa6d.jpg

Good to hear from you Cowbell! When I started this project I bookmarked websites that had interesting content, ideas for my build and many component options. That list of bookmarks grew to be over 200 sites. The post of your bike on Velospace (http://velospace.org/node/27170) was the very first one I bookmarked! I've always admired what you've done with your Cresta. It looks awesome!

Wow. I'm re-inspired to get back to work on my Cresta (been distracted on a couple other projects...). That's a real beauty, Saguaro.

Hey, Cowbell, what bars are those? The way they flare so wide at the drops makes me think I might like them. And how come you want to get rid of the Resurrectio decals and go back to traditional Nishiki ones?

Wow. I'm re-inspired to get back to work on my Cresta (been distracted on a couple other projects...). That's a real beauty, Saguaro.

Hey, Cowbell, what bars are those? The way they flare so wide at the drops makes me think I might like them. And how come you want to get rid of the Resurrectio decals and go back to traditional Nishiki ones?

They are Nitto Randonneurs. I like them but I have some Nitto Noodles on another bike that I like much better. As to the decals I go back and forth on whether to have it correctly labeled. It looks nice the way it is though.

Nicely done. By that time, Kawamura's better frames, such as yours, were world class. If I could own just one bicycle, it would be a traditional road touring bike.