Classic & Vintage - Nutted to quick release

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Nutted to quick release

scozim
08-26-12, 12:38 PM
Having trouble searching for this but I'm sure it was posted some time in the past. Is it hard to switch from a nutted hub axle to a quick release? The nutted axle I was working with yesterday ended up being bent and I would love to switch it to quick release. It measures 180 mm or so. What do I need to be concerned with in making the switch?

JohnDThompson
08-26-12, 01:16 PM
Basically, you will need a hollow axle and quick release lever assembly. To determine the proper axle length, you need to know how far apart the dropouts are on your frame. Once you have the proper axle, you can move the cones and locknuts from the solid axle to the hollow axle. This is a good opportunity to replace worn balls and repack the hub with fresh grease.
clubman
08-26-12, 01:16 PM
What hub are we talking about?

puchfinnland
08-26-12, 01:19 PM
I swapped a few of them.
but I did not change the front
if it is a commuter-its just too easy to steal
oddjob2
08-26-12, 01:24 PM
Buy this and some skewers.

http://www.niagaracycle.com/product_info.php?products_id=11316
scozim
08-26-12, 01:26 PM
What hub are we talking about?

Rear - Shimano - FH-HG20, 7 spd Hyperglide cassette