Bicycle Mechanics - New vintage build, where can i get Rear hanger adjuster bolts missing. HELP

Need some help or direction .

Almost done restoring a 1988 schwinn super sport. had the frame painted a few months back and now in the process of
finishing it.

I am missing the rear hanger hub adjuster bolts. (see pic below i pulled from ebay )
any ideas on where i can find those chrome bolts. or correct name so i can research them.

any help is welcomed.

Schwinn 1988 super sport (new Metalic silver paint )
1 gen Shimano 9 speed Ultegra complet with hubs ( not 600 )
Cenelli bars and stem
Salle italia flite Saddle



269713
269715

Sorry for the small pics. Click on picture to make it larger. looking for the two chrome bolts that control chain tension / stopper for the hub.


Promise to post pics of actual bike. its a beauty. Silver and black and im not even a NFL raiders fan.

Go Chargers.!!

Dropout adjusters

I checked a couple of places - didn't see 'em except on ebay

Loose Screws should have them. Use Google as I don't have the address in front of me. A LBS shop that has been around a long time should be able to dig up some for you also. No LBS, I have seen them on E-Bay also. Roger

Dropout adjusters

AKA micro adjusters. Try Yellow Jersey (http://www.yellowjersey.org) or Branford bike. If you can't find originals you can buy M3 3x.5 stainless screws at the hardware store and thread them in from the axle side. You won't be able to adjust them with the wheel in, so there's a bit of trial and error, but on the bright side by not sticking out the back, they can't get bent and jammed.

I think you might be referring to dropout adjustment screws. They typically go in at the back of the rear dropouts and locate/limit your rea hub's axle position in the dropout slot. I suspect that Campagnolo's version of those adjusetment screws would work with those dropouts. They are readily available from sellers at eBay, they come with either a knurled brass barrel shaped knob at the end (just like in the pic you posted) or a later black plastic ear shape knob. The the ones with the ear shaped knob makes it easier to turn or adjust, but older early 80's and 70's bikes came with the knurled barrel shaped knobs. You need to make sure that you get the right legnth as they come in long and short versions to match whatever legnth slot you have on your dropouts. You will have to shop around a bit as they are sold at wildly varying prices at eBay

Chombi

Perfect. i just ordered the ones on EBay. Thank you everybody for the fast response. I got the bike done on saturday and spent saturday and sunday looking for them. 20 minutes here and got the answer. thank you.