Singlespeed & Fixed Gear - Dodicci Special CG Project

Hi, my name is Artur, I'm from Latvia. I'm not Dodicci Special owner. But I really like this frame a lot. Closer to the point, I'm 3d artist and here is my portfolio, who are interesting: http://arturborovik.com/ as You guys can see, I specialized on automotive and interior works, also 2d stuff. And now I working on bike with Dodicci Special frame, I'm using 3ds max to model it. For now I have only geometry of 59cm big frame but still have problems with some dimensions. So I hope you will help me guys with 'em.

270807 270808 270809

The geometry which I have for now you can check in attachment. So my question is:

How long Head Tube is?
What Chainstay angle is?
How big Wheelbase is?
What diameter of tubes are, especially for diagonal Down Tube?


Any possible information will be helpful! Also if you guys are interesting, I can post updates on my project in this thread. Thank you, Artur B.

Moved from General.

If you e-mail Dodici with your questions, they will tell you.

I already do that and they didn't help me with that. They pretend that I didn't tell 'em that I need info, they only tell me this:


Hello Artur!
Thanks for getting in touch first of all!

Our DODICI SPECIAL frame is built with DEDACCIAI tubes custom made for DODICI.
To calculate your ideal size i need to know your inseam measurement and height in cm.


If you want to do a totally customized frame (choosing angles and lenght of the tubes) it will have an overprice of 200 euro, and it will take a lot more to get built (around 4/5 months).
If you want to choose this way, send me a complete geometry design, i will send it to the builder and ask him if its possible or not.


And my question in email was almost the same as I ask you in this thread! Don't know why he start to tell me about price!

They speak Italian and most likely aren't sure what you're asking.

http://i.imgur.com/hu4Qs.gif

http://www.youtube.com/watch?v=kMimygVTgbU&feature=player_detailpage#t=77s

1min17sec=lol

Anyway, if there is someone who have bike with Dodicci Special frame and can help me, please let me know! But I will try to send email to Dodicci again.

Even if someone did have the same bike i highly doubt they would take the time to make all the measurements and angles. Accuracy of those measurements would be off anyways.

Dodici said:


If you want to choose this way, send me a complete geometry design, i will send it to the builder and ask him if its possible or not.

Send them what you have. Ask them to fill in the gaps.

I have all the angles I need tubes outside diameter especially for diagonal down tube and length of head tube that's all. Need to try once again about writing to Dodicci!