BMX - How difficult to put coaster brake on freewheel?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
01-22-05, 06:53 PM
Considering putting a coaster brake (temporarily!) on a freewheel bike. Can this be done? How difficult and how much?
01-22-05, 06:57 PM
I'm relatively positive that you have to have a coaster hub for a coaster brake to work.
01-22-05, 10:46 PM
Pretty damn near impossible.
A freewheel screws onto a FREEWHEEL HUB
A coaster brake is integrated INTO a coaster hub.
Because of the size and configuration of a coaster hub, there are some coaster to freewheel adapaters that allow you to screw a freewheel onto a coaster hub... But, not the other way around.
If you want a coaster brake, you have to purchase a coaster hub, which is very tough to find in a good 36 or 48 hole variety, then build it into your existing wheel and depending on the size of the flanges on the coaster hub, you may need new spokes as well.
01-23-05, 07:58 AM
So, I suppose I can just get a 16" wheel/tire combo and switch it up for the time being?
Seriously, is there any reason I couldn't/wouldn't want to do that?
Would this stuff be interchangable between different brand bikes?
01-23-05, 10:21 PM
You can buy a cheap, POS bike from Goodwill for 20 bucks with 20" wheels and a coaster brake. Just don't ride it in any shape or form in a harsh manner.
I got one of my Japanese Suntour shells (top notch coaster) from a Barbie 12 inch bike. Welded 48 hole flanges on and rode it for several years. Parts most definitely are interchangable as long as measurements are correct... They usually are.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.