Mountain Biking - cut down bars
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
i've got sum profile cranks that when fitted to my darkangel are right on the end of there axel and have a ton of spacers that make it so they can go past the chainstay how can i change this. anyone got a clue?
01-24-05, 07:29 AM
I'm not exactly sure what your problem is, you need to include more detail, maybe a picture, but offhand I'd say it sounds like the wrong bottom bracket.
01-24-05, 11:40 AM
Well, with Profile cranks, the axle "floats" from side to side depending on how much you tighten the crank bolts.
If what I'm reading is "correct" you either need to move the axle towards one side, or basically, you need a longer axle.
Go to www.profileracing.com and go to the CONTACT link.
They also have a forum where you can ask specific questions.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.