vcjv
11-01-12, 06:55 PM
So my frame takes a 68 x 120 mm bb, what's a decent crankset or crank/bb combo. I'm looking for sturdiness to do tricks and jumps, any help is appreciated.
Fixed Gear Freestyle - Crankset
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Crankset
markaitch
11-02-12, 06:00 PM
your frame does not determine spindle length...you need match the bb & the cranks
vcjv
11-02-12, 07:54 PM
your frame does not determine spindle length...you need match the bb & the cranks
Ok my bad , so all I need to know is the 68 mm part then and then match it up to the cranks , any recommendations on brand etc.?
Ok my bad , so all I need to know is the 68 mm part then and then match it up to the cranks , any recommendations on brand etc.?
fietsbob
12-13-12, 06:13 PM
You probably want Cheap stuff, If you are going to beat it Up. 68 is the BB shell Width..
go see what your LBS Has .. a Generic, Origin 8* perhaps, a square taper BMX '3 piece'
with a long enough axle to get the chainline right.
since I cannot see squat, go into a Bike Shop and they can see what you have.
* dependent on what distributor lines they carry.
go see what your LBS Has .. a Generic, Origin 8* perhaps, a square taper BMX '3 piece'
with a long enough axle to get the chainline right.
since I cannot see squat, go into a Bike Shop and they can see what you have.
* dependent on what distributor lines they carry.
vcjv
12-13-12, 07:10 PM
Thanks for the help, Ive gotten the bb taken care of, and took the crankset off an older redline bmx i had, so far so good. looking at wheels now..