splat
02-13-05, 08:36 AM
well a couple of weeks ago I made a Set of Studded tires for my Sons Bike, ( see http://www.bikeforums.net/showthread.php?t=86524 ) Yesterday they had there maiden voyage , Today was the real test .
Last night as we drove by a Weston Pond we noticed there were people Ice skating on it . I instantly thought ride.
So he and I rode out bikes over there.
the pond in most places had about a 1/2 inch of crusty stuff on the top , with patches of super smooth Ice.
Here is my Son ras we got on the pond
http://home.comcast.net/~jgoeller/misc/IMG_4588.jpg
Here he dicided to lock up the rear Backes on sone smooth Ice.
also Here is a Side shot of his Bike MMcG , ( Like the front Spoke Pattern ? I had fun Making that wheel )
http://home.comcast.net/~jgoeller/misc/IMG_4591.jpg
A pic of the Old Man
http://home.comcast.net/~jgoeller/misc/IMG_4613.jpg
Now a little refreshers
here is one ofthe tires I made , 1/2 Sheet metal Screws In an set of Old IRC ( studded ) Blizzards , THe studs are pretty work but you can see they are still there
http://home.comcast.net/~jgoeller/misc/IMG_4524.jpg
Now this is the pattenr these tires make with Me Using them , my son at 60 pounds doesn't make as pronouced a pattern.
you can see the outer scrapes from the screws , and the old worn studs are still actually getting some bite. this was also after lowering the air presure some too.
http://home.comcast.net/~jgoeller/misc/IMG_4596.jpg
Last night as we drove by a Weston Pond we noticed there were people Ice skating on it . I instantly thought ride.
So he and I rode out bikes over there.
the pond in most places had about a 1/2 inch of crusty stuff on the top , with patches of super smooth Ice.
Here is my Son ras we got on the pond
http://home.comcast.net/~jgoeller/misc/IMG_4588.jpg
Here he dicided to lock up the rear Backes on sone smooth Ice.
also Here is a Side shot of his Bike MMcG , ( Like the front Spoke Pattern ? I had fun Making that wheel )
http://home.comcast.net/~jgoeller/misc/IMG_4591.jpg
A pic of the Old Man
http://home.comcast.net/~jgoeller/misc/IMG_4613.jpg
Now a little refreshers
here is one ofthe tires I made , 1/2 Sheet metal Screws In an set of Old IRC ( studded ) Blizzards , THe studs are pretty work but you can see they are still there
http://home.comcast.net/~jgoeller/misc/IMG_4524.jpg
Now this is the pattenr these tires make with Me Using them , my son at 60 pounds doesn't make as pronouced a pattern.
you can see the outer scrapes from the screws , and the old worn studs are still actually getting some bite. this was also after lowering the air presure some too.
http://home.comcast.net/~jgoeller/misc/IMG_4596.jpg
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.