Bicycle Mechanics - Shifters, derailleurs and storage

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Shifters, derailleurs and storage

fongster
11-02-00, 05:41 PM
I was thinking it's a good idea to leave your shifters in the highest (smallest sized) rear cogs and the lowest chainring (smallest or innermost one) because the cables are strectched the least and the derailleurs' springs aren't maxed out. Should make tune ups last longer. Any thoughts?

ljbike
11-02-00, 08:14 PM
You need to follow your own instincts, but in reality I doubt that it makes very much difference. At least I've never noticed any. But then, I've never really thought about it as a way to make parts last lnoger. It's an interesting question. I hope you get some good responses.
Joe Gardner
11-02-00, 08:30 PM
Fongster, I always do exactly what you mention above to my bikes, even if I know im going to be riding the next day, I guess its habit, but I do think that this will prolong the life of my derailleurs.

Czar of Dirt
06-28-05, 11:52 PM
Less tension on the springs during storage is a good idea.
neil0502
06-29-05, 07:30 AM
Where'd you dig up this old thread??
Czar of Dirt
06-29-05, 10:39 AM
Bottom of the thread tool box. :)
Bikewer
06-29-05, 11:09 AM
Modern springs are amazingly resistant to failure, though. Sort of unrelated, but firearms magazine springs have been stored in a fully-loaded (strongly compressed) condition for many years with no failure whatever.

Still, for long storage, can't hurt.
John E
06-29-05, 01:39 PM
I generally leave my bikes with the chain on the small chainring and one of the smaller cogs, but I am MUCH less adamant about this than I used to be. It definitely can't hurt, but it may or may not help.