Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.Surferbruce
04-01-05, 08:28 AM
ok after proper torque is set on my headset and stem bolts are fully tightened, is it ok to further tighten the cap bolt? i seem to recall reading that after the headsets set and the stem is tight you can loosen/tighten the cap bolt without effecting the headset adjustment.
the stack of specers above my stem was causing some creaking, tightening down the cap bolt eliminates the noise but i just want to clarify i'm not messing up the headset.
the stack of specers above my stem was causing some creaking, tightening down the cap bolt eliminates the noise but i just want to clarify i'm not messing up the headset.