x2mars
04-04-05, 08:55 AM
what size is the typical track nut, i can't seem to find the perfect fitting wrench.
Singlespeed & Fixed Gear - track nut size
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : track nut size
Rev.Chuck
04-04-05, 08:57 AM
Mine are 15mm.
Ya Tu Sabes
04-04-05, 09:02 AM
Yeah, 15 mm seems to be the norm, though I've seen a few that were 14 mm.
Cynikal
04-04-05, 10:06 AM
15mm here as well
pitboss
04-04-05, 10:16 AM
The track nuts on my Miche front hub are 9/16
BostonFixed
04-04-05, 10:18 AM
']The track nuts on my Miche front hub are 9/16
WTF? Why would an italian made hub have 9/16" nuts on it?
WTF? Why would an italian made hub have 9/16" nuts on it?
pitboss
04-04-05, 10:20 AM
not sure - but the 15mm PB wrench is too big, so I use a 9/16 without fail.
onelesscar
04-04-05, 10:25 AM
my miche primato have 14mm
Rev.Chuck
04-04-05, 11:15 AM
9/16" = 14.2mm They are often interchangeable depending on tolerance 7/16" =11.1mm and 3/4" = 19mm For those times when you need one but have the other.
Judah
04-04-05, 11:20 AM
6mm hex wrench here :p
(but seriously, my Suzues and Superbe Pros both came with 15mm)
(but seriously, my Suzues and Superbe Pros both came with 15mm)
ch0mb0
04-04-05, 01:12 PM
why is it I never see multi-tools with that size?
jim-bob
04-04-05, 02:00 PM
why is it I never see multi-tools with that size?
Because to most of the world, nutted axles are a throwback.
Because to most of the world, nutted axles are a throwback.