Bicycle Mechanics - BBracket size of Mongoose Switchback

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
Holstein50
04-09-05, 05:42 AM
I need to overhaul the bottom bracket on my winter bike which is a Mongoose Switchback.
I got the bike used so I'm guessing it's one of the first ATB designs, (late 80's), due to its relaxed frame geometry. Before I tear it apart, does anyone know what size the shell is?
I'm guessing it's a 73.

Thanks!

Jim

sydney
04-09-05, 07:36 AM
I need to overhaul the bottom bracket on my winter bike which is a Mongoose Switchback.
I got the bike used so I'm guessing it's one of the first ATB designs, (late 80's), due to its relaxed frame geometry. Before I tear it apart, does anyone know what size the shell is?
I'm guessing it's a 73.

Thanks!

JimWhy don't you measure it?
Holstein50
04-09-05, 04:32 PM
The spindle part is difficult to accurately measure until it's disassembled.
I was hoping someone knew before I tore into it. Turns out it's 125mm.
None of my used bb parts will fit so now it will have to remain in pieces for awhile until I can find replacement parts.

sydney
04-09-05, 06:46 PM
The spindle part is difficult to accurately measure until it's disassembled.
I was hoping someone knew before I tore into it. Turns out it's 125mm.
None of my used bb parts will fit so now it will have to remain in pieces for awhile until I can find replacement parts.You asked about the shell width.ThAT IS NOT DIFFICULT AND REQUIRES NO DISASSEMBLY.
Holstein50
04-10-05, 08:01 AM
Sorry about the confusion, sydney.
I often hear "shell" referred to (incorrectly no doubt) as the whole bottom bracket unit. I understand it is technically the frame only part of the bike. Same confusion arrises from the use of the "axle" and "spindle" part of the bracket as well.

Right now I'm trying to find a 73 x 124.5 replacement spindle.