Protecting drivetrain from rain
#1
Member
Thread Starter
Join Date: Mar 2009
Posts: 48
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Protecting drivetrain from rain
Hey guys,
I've been thinking of ways to protect the sprockets and chain on my bike from rain and subsequently corrosion and rust. Every time it rains, I clean and re-lube the chain to stop it from getting rusty. However this is becoming very tiresome.
I was thinking about designing some sort of plastic cover, I've attached a concept picture of it.
Is there any reason why they are not made from stainless steel? If they were, they would not rust :/
I've been thinking of ways to protect the sprockets and chain on my bike from rain and subsequently corrosion and rust. Every time it rains, I clean and re-lube the chain to stop it from getting rusty. However this is becoming very tiresome.
I was thinking about designing some sort of plastic cover, I've attached a concept picture of it.
Is there any reason why they are not made from stainless steel? If they were, they would not rust :/
#2
Senior Member
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times
in
222 Posts
There are stainless chains available for single-speed/internal gear bikes.
Sure, they might not rust, but they need regular lubes anyhow not to wear out too soon.
These can also be fitted with full-cover chaincases. Like your idea, only smaller.
For frequently used external gear bikes, particularly modern ones with 9/10/11 rear sprockets, "pure" mechanical wear will age the parts so fast that keeping them rust-free until elongation forces a replacement isn't much of a challenge. The lube they need for internal friction control will also do well enough to keep the rust away.
Sprocket rust is overwhelmingly a visual and not a functional issue.
Sure, they might not rust, but they need regular lubes anyhow not to wear out too soon.
These can also be fitted with full-cover chaincases. Like your idea, only smaller.
For frequently used external gear bikes, particularly modern ones with 9/10/11 rear sprockets, "pure" mechanical wear will age the parts so fast that keeping them rust-free until elongation forces a replacement isn't much of a challenge. The lube they need for internal friction control will also do well enough to keep the rust away.
Sprocket rust is overwhelmingly a visual and not a functional issue.
#3
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
Chain cases are available but are bulky, heavy and a PITA to adjust and to remove when a wheel change or derailleur adjustment is needed. There are also nickel-plated chains which resist rusting. Just keep your chain lubed and fairly clean, which has benefits beyond rust mitigation, and don't sweat some superficial rust.
Stainless steels tend to be softer, wear faster and are more prone to galling than run-of-the-mill carbon steel and command a premium price to boot.
Stainless steels tend to be softer, wear faster and are more prone to galling than run-of-the-mill carbon steel and command a premium price to boot.
#4
Senior Member
Join Date: Nov 2009
Location: Fayetteville, NC
Posts: 346
Bikes: 2013 Rivendell Sam, 1996 Bianchi Milano, 1994 Trek 820
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Likes: 0
Liked 8 Times
in
4 Posts
If you want to protect your drivetrain, start with full-coverage fenders, long mud flaps, and road tires (non-knobbies, at least). Fully enclosed chain cases (like your drawing) don't work with derailleurs, btw.
#5
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
Beyond fenders, I've found the best rust preventative is a dry rag after a rainy ride.
#6
Banned
Chain cases are already made for IGH. I dont get the trying to do it with a Derailleur bike.
Hebie Chain glider is Made in self lubricating Plastics, weighs less , For Alfine and Rohloff Hubs..
Hebie Chain glider is Made in self lubricating Plastics, weighs less , For Alfine and Rohloff Hubs..
Last edited by fietsbob; 07-07-15 at 09:39 AM.
#7
Senior Member
Rust? Too much cleaning. Once a week, put the bike on a stand and run the chain backwards through a rag, relube, 10-20 drops. And sometimes after it gets wet.
#8
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 9,991
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4311 Post(s)
Liked 2,954 Times
in
1,601 Posts
I would rather ride a rusty chain.
#9
Banned
Computer people get paid more than bike Mechanics , if working on your bike is too dirty a Job, you can Hire the help.
#10
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,830
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4745 Post(s)
Liked 3,861 Times
in
2,510 Posts
Of course, there's the IGH and belt drive. Clean, simple and very water resistant. And there's the fix gear. Rust, even a lot, won't stop a fix gear. In my ice, snow and salt days, I ran a fix gear that saw nearly no attention all winter. Frozen links? Slide the wheel forward to get the proper sack and ride. Three frozen links? I'll oil the chain when I get home.
Ben
Ben
#11
Senior Member
Join Date: Aug 2005
Location: Las Vegas, NV
Posts: 932
Bikes: '04 LeMond Buenos Aires, '82 Bianchi Nuova Racing, De Rosa SLX, Bridgestone MB-1, Guerciotti TSX, Torpado Aelle, LeMond Tourmalet 853, Bridgestone Radac
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 46 Times
in
36 Posts
If riding in full-on rain were a regular thing for me, I'd spray my drivetrain with WD-40 before heading out. It's supposed to displace water, right?
Last edited by Eric S.; 07-07-15 at 06:34 PM.
#12
Not quite there yet
Join Date: Feb 2013
Location: Monkey Bottom, NC
Posts: 1,000
Bikes: A bunch of old steel bikes + an ICE trike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Why stop at just the drive train? A full fairing will protect the whole bike and also add an aero advantage.
#13
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times
in
363 Posts
Hey guys,
I've been thinking of ways to protect the sprockets and chain on my bike from rain and subsequently corrosion and rust. Every time it rains, I clean and re-lube the chain to stop it from getting rusty. However this is becoming very tiresome.
I was thinking about designing some sort of plastic cover, I've attached a concept picture of it.
Is there any reason why they are not made from stainless steel? If they were, they would not rust :/
I've been thinking of ways to protect the sprockets and chain on my bike from rain and subsequently corrosion and rust. Every time it rains, I clean and re-lube the chain to stop it from getting rusty. However this is becoming very tiresome.
I was thinking about designing some sort of plastic cover, I've attached a concept picture of it.
Is there any reason why they are not made from stainless steel? If they were, they would not rust :/
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#14
Senior Member
Join Date: Jan 2015
Location: Porter, Texas
Posts: 4,125
Bikes: Trek Domane 5.2, Ridley Xfire, Giant Propel, KHS AeroComp
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 1648 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
if it is too tiresome, you must be doing it wrong....unless something that takes maybe 5 minutes of time is too tiresome. I do not see the problem you are solving as being worth the problem you would be creating.
#15
Senior Member
Join Date: May 2005
Location: La La Land (We love it!)
Posts: 6,301
Bikes: Gilmour road, Curtlo road; both steel (of course)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Likes: 0
Liked 10 Times
in
9 Posts
Stop riding in the rain..?
__________________
Today, I believe my jurisdiction ends here...
Today, I believe my jurisdiction ends here...