Ergo Grip Advice...
#1
Junior Member
Thread Starter
Join Date: Jun 2016
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ergo Grip Advice...
I handed-down my Cannondale Hybrid to my son a few weeks ago when I got a new Trek 7.3. The ergo grips on the 7.3 are a real hit with me and my son.
So, I want to get ergo grips for the Cannondale. Here's what I am looking for, but I need some advice...
- Grips that are affordable (less than $30?)
- Can accommodate grip-shifts on left and right, so they need to be short
- How to remove existing grips
- How to install new ones
- Best place to buy
Thanks!
-bk
So, I want to get ergo grips for the Cannondale. Here's what I am looking for, but I need some advice...
- Grips that are affordable (less than $30?)
- Can accommodate grip-shifts on left and right, so they need to be short
- How to remove existing grips
- How to install new ones
- Best place to buy
Thanks!
-bk
#3
Senior Member
Join Date: Aug 2015
Location: 'Murica
Posts: 234
Bikes: Fuji Allegro
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I find that if you twist and pull outwards from the stem side, they tend to come off. If they don't, they get the knife. Probably not the best approach for carbon or aluminum.
I buy my grips from the bike shop.
I buy my grips from the bike shop.
Last edited by Cheddarpecker; 07-10-16 at 06:52 AM. Reason: Reason:
#4
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
They may be slightly above your budget but I highly recommend Ergon grips. They make several models which are sized for grip shifts. The BioKork models are especially nice IMO.
#5
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Which Grip Shifts?
Niagara Bike will almost surely have Ergon shape grips that will mate with the most common (short) Grip Shifts. If your son's bike has the half pipe style Grip Shifts, I suspect that you are out of luck.
For removal and installation, the magic word is "Aquanet". Spray a little hairspray under your existing grip and it will slide right off. Spray a little into your new grip and it will slide right on. LEAVE IT ALONE for an hour or so and the new grip will stay firmly in place.
Niagara Bike will almost surely have Ergon shape grips that will mate with the most common (short) Grip Shifts. If your son's bike has the half pipe style Grip Shifts, I suspect that you are out of luck.
For removal and installation, the magic word is "Aquanet". Spray a little hairspray under your existing grip and it will slide right off. Spray a little into your new grip and it will slide right on. LEAVE IT ALONE for an hour or so and the new grip will stay firmly in place.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#6
Junior Member
Thread Starter
Join Date: Jun 2016
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for all the quick feedback.
The Gripshift model is SRT300i.
After some research, I am thinking that these might work:
Ergon GP1 L Large Gripshift Performance Black Grey Bicycle Grips | eBay
The Gripshift model is SRT300i.
After some research, I am thinking that these might work:
Ergon GP1 L Large Gripshift Performance Black Grey Bicycle Grips | eBay
#8
Senior Member
Join Date: Dec 2005
Location: Sunny Tampa, Florida
Posts: 1,542
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 49 Times
in
41 Posts
If you have access to an air compressor, it can make grip removal and install fast and easy. Just put the nozzle onto the edge of the grip and bar and blast while you pull off or push on.
This will make noises that may embarrass or delight your son depending on his age.
This will make noises that may embarrass or delight your son depending on his age.
__________________
Still stupid and seriously neglected..
Still stupid and seriously neglected..
#9
Junior Member
Thread Starter
Join Date: Jun 2016
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey - I would find that pretty entertaining. :-)
Thanks for all the advice folks.
I'll let you know what I end up with.
Great to be back riding again!
Thanks for all the advice folks.
I'll let you know what I end up with.
Great to be back riding again!
#10
Generally bewildered
Join Date: Aug 2015
Location: Eastern PA, USA
Posts: 3,037
Bikes: 2014 Trek Domane 6.9, 1999 LeMond Zurich, 1978 Schwinn Superior
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1152 Post(s)
Liked 341 Times
in
251 Posts
I just traded a trekking ("Butterfly", or "Gregg") handlebar from my wife's bike (a cast-off from a relative) to straight bars. I put Ergon GP-3 handles on the thing. Essentially GP-1s with bar extensions. My wife has carpal tunnel issues (her hands get numb from riding, anyway) and she really liked the Ergons. More than your budget (about $50), though.
We rode 30 miles together yesterday. It was a lot of fun, and she tells me her wrists and shoulders would not have been able to do it without the new bar ends. So the expense was worth it.
We rode 30 miles together yesterday. It was a lot of fun, and she tells me her wrists and shoulders would not have been able to do it without the new bar ends. So the expense was worth it.
#11
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Looks like you can buy the normal ergon grips for ~$30 at REI. I'd go for that. They offer grip shift ones as well. I have the normal ergon (non grip shift) on my MTN bike and I love them.
As for removing the old ones? Do not follow the advice to cut them off. That is an absolute last resort that I only use if the grips themselves have deteriorated and are literally a bunch of goop. Stick a small flat screwdriver under the grip. Spray/pour some rubbing alcohol in there. Pull the screwdriver out. Twist the grip back and forth a bit on the side that you poured the alcohol in. Pull the grip off while twisting. If it doesn't work the first time, try again and push the screwdriver further in this time. You can also use hairspray, but if you don't get it off in time it makes it more sticky instead of less.
I use hairspray to put grips on, alcohol to take them off.
As for removing the old ones? Do not follow the advice to cut them off. That is an absolute last resort that I only use if the grips themselves have deteriorated and are literally a bunch of goop. Stick a small flat screwdriver under the grip. Spray/pour some rubbing alcohol in there. Pull the screwdriver out. Twist the grip back and forth a bit on the side that you poured the alcohol in. Pull the grip off while twisting. If it doesn't work the first time, try again and push the screwdriver further in this time. You can also use hairspray, but if you don't get it off in time it makes it more sticky instead of less.
I use hairspray to put grips on, alcohol to take them off.
#12
Senior Member
Ergon GP-1s are $24.61 from Amazon. Just bought a pair for my fat bike. They really are as good as everyone says.