Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Bicycle chain removal and reinstall, safe?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Bicycle chain removal and reinstall, safe?

Old 07-20-16, 12:58 PM
  #1  
Member
Thread Starter
 
Join Date: Dec 2013
Posts: 27
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Bicycle chain removal and reinstall, safe?

I just replaced my chain, and I made a mistake that required me to remove the new chain and reconnect it.

To do this I simply removed an arbitrary pin (not on the spot where the new joining pin was), then reinserted the same pin in the same spot. This is a KMC Z72 chain on a mountain bike, if it should matter.

It seems to work fine, but is this safe to do? Did I just ruin the new chain and will I have it fail prematurely?
fractal5 is offline  
Old 07-20-16, 01:02 PM
  #2  
incazzare.
 
lostarchitect's Avatar
 
Join Date: Mar 2010
Location: Catskills/Brooklyn, NY
Posts: 6,970

Bikes: See sig

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 55 Times in 38 Posts
I have done it 100 times. If you put it together correctly you are fine.

edit: I'm assuming it's a 5-7 speed chain here.
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter

Last edited by lostarchitect; 07-20-16 at 09:30 PM.
lostarchitect is offline  
Old 07-20-16, 01:05 PM
  #3  
Senior Member
 
Join Date: Jun 2016
Posts: 625
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 252 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Kind of. It has mushroomed pins that aren't meant to be removed and reinstalled. You might be able salvage the chain with a quick-link for a couple of bucks. Remove the affected outer and replace with the quick link.
2lo8 is offline  
Old 07-20-16, 01:07 PM
  #4  
Banned
 
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924

Bikes: RANS Stratus TerraTrike Tour II

Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 3352 Post(s)
Liked 1,056 Times in 635 Posts
I use a quick link on both my bike and trike. They make it easy to remove and replace a chain.

Last edited by rydabent; 07-21-16 at 06:40 AM.
rydabent is offline  
Old 07-20-16, 01:09 PM
  #5  
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,355 Times in 862 Posts
Yes.

To Push a riveted (mushroomed) pin out you stretched the hole in the Side Plate
Z72 » KMC Chain

So Odds are It will come apart there when you shift hard in the woods enough times .

If you cut it removed the outer link , put a Quick Link in ,

instead of pushing the pin in the likely hood is reduced ,

because as it is the pin fits loosely in the link plate hole.

and the pin head is nearly flush with the face of the side Plate .

BITD , 6 speed era the chains were different.


/..
fietsbob is offline  
Old 07-20-16, 04:28 PM
  #6  
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times in 741 Posts
Originally Posted by lostarchitect
I have done it 100 times. If you put it together correctly you are fine.
I've also done it 100 times with older 5/6-speed chains. I would NEVER do it with newer 8+-speed chains.
HillRider is offline  
Old 07-20-16, 09:03 PM
  #7  
Mechanic/Tourist
 
Join Date: Apr 2007
Location: Syracuse, NY
Posts: 7,522

Bikes: 2008 Novara Randonee - love it. Previous bikes:Motobecane Mirage, 1972 Moto Grand Jubilee (my fave), Jackson Rake 16, 1983 C'dale ST500.

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 486 Post(s)
Liked 11 Times in 11 Posts
Originally Posted by HillRider
I've also done it 100 times with older 5/6-speed chains. I would NEVER do it with newer 8+-speed chains.
+1 Without knowing what number of cogs the OP is working with one can't just say it's OK to go ahead.
cny-bikeman is offline  
Old 07-20-16, 09:24 PM
  #8  
incazzare.
 
lostarchitect's Avatar
 
Join Date: Mar 2010
Location: Catskills/Brooklyn, NY
Posts: 6,970

Bikes: See sig

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 55 Times in 38 Posts
Originally Posted by HillRider
I've also done it 100 times with older 5/6-speed chains. I would NEVER do it with newer 8+-speed chains.
For some reason I assumed it was a 5-7 speed chain due to the chain model number. Yeah if it's an 8+ speed chain, use a quick link.
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter

Last edited by lostarchitect; 07-20-16 at 09:30 PM.
lostarchitect is offline  
Old 07-20-16, 10:24 PM
  #9  
Senior Member
 
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times in 760 Posts
The KMC website says the Z72 chain has mushroomed riveting. I don't think I'd re-use a pin on that chain.
Camilo is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lambo2124
Bicycle Mechanics
12
05-19-14 10:49 AM
Peloton44
Bicycle Mechanics
7
06-28-12 11:30 AM
Barnabas
Bicycle Mechanics
13
02-15-12 09:37 PM
AusTai
Road Cycling
8
09-26-11 06:12 PM
hjbiker43
Bicycle Mechanics
1
12-15-09 04:54 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.