Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

More and more CF frames failing...

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

More and more CF frames failing...

Old 07-25-16, 05:50 AM
  #26  
Senior Member
 
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,890

Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 751 Post(s)
Likes: 0
Liked 799 Times in 467 Posts
Originally Posted by FBinNY
Let me add that CF may be getting a bad rap because of a significant different on how it fails, rather than the fact that it does.

The metals used in frames have varying degrees of ductility, while CF has near zero. This means that when over stressed, say by a crash or road hazard metal frames will protest and announce the problem by bending or buckling rather than snapping.

So when a crashed steel or aluminum frame bends we don't blame the material, and if it should later snap, we know why and chalk it up to our own stupidity in riding a compromised frame.

However, CF being the strong silent type, there's usually no evidence of crash damage, short of a total failure. That means we're given no visible warning of issues, and continue riding a frame that may be compromised. When it ultimately fails, it's hard to trace it back to the earlier event, and we blame the material instead.

Combine that with the underbuilding I mentioned earlier, and you have a recipe for the sudden catastrophic failures that we're seeing.
I agree with everything you're saying..though my first thought is to take a step or two back and ask about the total-design question. If one were to design a bike without any knowledge of materials, and knowing that frames will fail for various reasons, I'd think some indication of on-coming material failure would be a key design criteria that would fall into the "need to have" column, while "sudden failure without warning" would fall into the column of design attributes to be avoided at all costs.

It's certain the engineers in the various CF frame design groups have discussed this ad nauseum, though have decided** that sudden severe failure is acceptable. Whether the failure is due to a owners normal (careful) use (for traditional-metal bikes) isn't relevant as good design includes robustness toward normal, expected use. Of course that's the ideal world..the real world boils down to money to be made vs manageable claims due to failures. Lower weight, riskier designs will continue until some (newly quadriplegic) user, somewhere, is awarded a sizable damage claim in court. At that point the risk of potential claims will tilt the "managable claims" into the "unmanagable claims" column and the designs will lean toward more robust frames, or some technology to indicate over-stressing and potential failure.

**slight correction:..It wouldn't be the engineers that make the decision on "acceptable risk"..the risk would be presented by the engineers, heavily evaluated by attorneys, and signed off in some way by someone at or approaching C-level management.

Last edited by fishboat; 07-25-16 at 06:25 AM. Reason: **slight correction
fishboat is offline  
Old 07-25-16, 05:58 AM
  #27  
Senior Member
Thread Starter
 
NYMXer's Avatar
 
Join Date: Oct 2015
Location: Middletown NY
Posts: 1,495

Bikes: Cannondale SuperSix EVO w Hi-Mod frame, Raleigh Tamland 1 and Giant Anthem X

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 352 Post(s)
Likes: 0
Liked 8 Times in 6 Posts
Originally Posted by Rowan
No, it isn't. He's one of the best.
Well, it was his comment about Chain-L in some thread that got me to buy it.
I'm appreciating all the good sharing of experience and advice as a member here. Some members advice is better than others...
NYMXer is offline  
Old 07-25-16, 06:08 AM
  #28  
Senior Member
Thread Starter
 
NYMXer's Avatar
 
Join Date: Oct 2015
Location: Middletown NY
Posts: 1,495

Bikes: Cannondale SuperSix EVO w Hi-Mod frame, Raleigh Tamland 1 and Giant Anthem X

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 352 Post(s)
Likes: 0
Liked 8 Times in 6 Posts
Originally Posted by fishboat
It's certain the engineers in the various CF frame design groups have discussed this ad nauseum, though have decided that sudden severe failure is acceptable. Whether the failure is due to a owners normal (careful) use (for traditional-metal bikes) isn't relevant as good design includes robustness toward normal, expected use. Of course that's the ideal world..the real world boils down to money to be made vs manageable claims due to failures. Lower weight, riskier designs will continue until some (newly quadriplegic) user, somewhere, is awarded a sizable damage claim in court. At that point the risk of potential claims will tilt the "managable claims" into the "unmanagable claims" column and the designs will lean toward more robust frames, or some technology to indicate over-stressing and potential failure.
This is a bit deeper as to my liability statement in an earlier post. For sure, lawyers and liability have to be considered and there is some proof of that in the cost of a new bike.

Also, it is generally accepted that triangular designs are stronger than let's say square, rectangular, etc. The flaw may be that all the force in a triangulated design (think truss here) is focused to points designed to counter each other but allow some of the force to be tolerated. I think with such a rigid design, CF would need a modified connection design over what is being produced today, but oddly enough, not all failures are at the joints.

I agree with a previous statement, there is more to be learned about using CF in bike frames.
NYMXer is offline  
Old 07-25-16, 08:17 AM
  #29  
Senior Member
 
wphamilton's Avatar
 
Join Date: Apr 2011
Location: Alpharetta, GA
Posts: 15,280

Bikes: Nashbar Road

Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 2934 Post(s)
Liked 341 Times in 228 Posts
Drilling down to first principles, carbon fiber composite will, theoretically, eventually fail given enough stress cycles even with small amounts of stress. I understand that it's due to the breaking of covalent bonds between monomer units of the polymer chains (a fancy way of saying that atoms of two molecules both hold onto one electron, holding the molecules together in a long chain). Once wrested away from a molecule, most polymers don't "self-heal" at normal temperatures by grabbing it back somewhere. So the breaks pile up until the material fails.

Just visualizing this, with polymer chains in all directions and random connections breaking, it's easy to see how the material might not give any reliable indication in its reaction to stress - until it breaks. But it's also reasonable that it all depends on how many of these bonds there are, how dense it is, how much mass and how strong those polymer bonds are, so that "enough stress cycles" is more than you'll ever see. Which is why I'm personally not worried about my CF fork, except where bonded to the aluminum. I think it's over-built, considerably.

What I don't understand is why frame manufacturers don't build a "canary" into the frames at critical stress points, perhaps another polymer which is known to fail with fewer stress cycles than that part of the frame.
wphamilton is offline  
Old 07-25-16, 08:29 AM
  #30  
Senior Member
 
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094

Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2

Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by turkey9186
Is it because a higher percentage are failing, or are you hearing of more failures because there are more CF bikes on the road?
I have a friend that broke the drive side chain stay on three Trek Madone's. The fact he is 6'3" and 240#s may have had something to do with it?
I have a 2012 Supersix frame with a cracked seat tube. After a sudden stop the bike went airborne and landed on a corner of the seat. A metal frame would have probably survived.
So are you saying that carbon bikes aren't suitable for 6'3" 240 lb guys? I thought carbon was stronger than steel? Then why are steel bikes always suggested for clydes?

corrado33 is offline  
Old 07-25-16, 08:38 AM
  #31  
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,545

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5703 Post(s)
Liked 2,432 Times in 1,345 Posts
Originally Posted by corrado33
So are you saying that carbon bikes aren't suitable for 6'3" 240 lb guys? I thought carbon was stronger than steel? Then why are steel bikes always suggested for clydes?

Again -- it's not the material per se. It's the application, meaning the overall design, construction, and intended purpose.

It's perfectly possible to build a CF frame for a 300# rider or even heavier. But that's not what the available frames/bikes are built for. To set the record straight, I wouldn't recommend a superlight steel frame for a heavy rider either.

High end bikes built for sport, whether metal or CF aren't for heavy riders the same way that sports cars aren't for hauling bricks.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Old 07-25-16, 08:48 AM
  #32  
Senior Member
 
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,847

Bikes: Fuji Touring, Novara Randonee

Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2578 Post(s)
Liked 1,901 Times in 1,193 Posts
Originally Posted by FBinNY
Again -- it's not the material per se. It's the application, meaning the overall design, construction, and intended purpose.

It's perfectly possible to build a CF frame for a 300# rider or even heavier. But that's not what the available frames/bikes are built for.

And to further that insight, it's relatively easy for a framebuilder to spec heavier tubes for the large rider. It's possible, just not likely, that someone could come up with new molds, fabric layups, etc. to build a slightly heavier CF frame. Those things are so automated and specifically tooled that it's not financially viable to build a custom CF frame for a heavy rider.
pdlamb is offline  
Old 07-25-16, 11:17 AM
  #33  
Senior Member
 
squirtdad's Avatar
 
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,856

Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque

Mentioned: 104 Post(s)
Tagged: 0 Thread(s)
Quoted: 2304 Post(s)
Liked 2,741 Times in 1,499 Posts
Originally Posted by drlogik
I'm an avid fly fisherman. What's that got to do with this thread? Well, it is well known in the fly fishing community that if a split shot hits a graphite, boron or carbon rod during the cast it will weaken it and it will snap unexpectedly...almost guaranteed, you just don't know when.

My guess is the same with carbon bike frames. Even a little nick from leaning against a brick wall, or falling over can compromise the integrity of the frame in that spot. Like an earlier poster noted, it won't bend, crumple or protest or give a warning, it will just snap all at once.

Fly rods are no different. I've had two snap unexpectedly over the years. Both were expensive and high performance rods. For this reason I shy away from anything carbon. It just doesn't take much abuse. For me, longevity and durability are paramount in my equipment. I will sacrifice more weight for dependability in adverse conditions. For me, carbon just isn't my material of choice.
Originally Posted by markjenn
Your "guess" would be wrong.

- Mark
The point is general is very valid..... Carbon fiber composite strength depends on the unity of the matrix of carbon fibers and resin. If this integrity is compromizsed, say by a rock hiting a stay, something falling in a top tube, or significant cut, a failure point is introduced and strength when stressed is reduced with the potential for the catastrophic failure that carbon is knon for.

as noted in other threads, this is especially true if the carbon build is super light. A heavier build would be much less susceptable.

I also think that design with longer seatposts (levers) and fewer sizes with sloped top tubes results in more bikes (carbon and aluminum) haveing more stress when a rider is at the high end of the size the frame is intended for.
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)



squirtdad is offline  
Old 07-25-16, 11:23 AM
  #34  
Senior Member
 
squirtdad's Avatar
 
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,856

Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque

Mentioned: 104 Post(s)
Tagged: 0 Thread(s)
Quoted: 2304 Post(s)
Liked 2,741 Times in 1,499 Posts
Anecdotal only. A friend at work is long term bike racer (cat 1) whippet thin. He started riding in the days of steel and campy parts as the only way to go.

he rides carbon now as he is performance oriented. he went through 3 carbon frames (trek or specialized forgot which) that cracked, broke, or had other issues before he switched to a different brand (Leopard if makes diference) he noted this never happened when is was steel frames.

Overall just talking to people i know it seem like there are more frame issues (carbon and aluminum) and it seem design and build weight are alwasy key issues in root cause
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)



squirtdad is offline  
Old 07-25-16, 11:36 AM
  #35  
Senior Member
 
Join Date: Aug 2006
Posts: 1,160
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 154 Post(s)
Liked 14 Times in 11 Posts
Originally Posted by squirtdad
The point is general is very valid..... Carbon fiber composite strength depends on the unity of the matrix of carbon fibers and resin. If this integrity is compromizsed, say by a rock hiting a stay, something falling in a top tube, or significant cut, a failure point is introduced and strength when stressed is reduced with the potential for the catastrophic failure that carbon is knon for.
Certainly a deep gouge or something similar MIGHT eventually compromise strength, but we have people on this thread saying that you can induce a failure-inducing crack by leaning the bike up against a brick wall. This is patently ridiculous. Normal road debris hitting a stay? The same.

Carbon fiber is, in general, not a "fragile" material where small surface imperfections, scratches, etc. eventually propagate and cause failure. One just needs to exercise reasonable care.

- Mark
markjenn is offline  
Old 07-25-16, 12:11 PM
  #36  
Senior Member
 
Jarrett2's Avatar
 
Join Date: May 2013
Location: DFW
Posts: 4,126

Bikes: Steel 1x's

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 632 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
Originally Posted by FBinNY
Let me add that CF may be getting a bad rap because of a significant different on how it fails, rather than the fact that it does.

metal frames will protest and announce the problem by bending or buckling rather than snapping.

So when a crashed steel or aluminum frame bends we don't blame the material, and if it should later snap, we know why and chalk it up to our own stupidity in riding a compromised frame.

However, CF being the strong silent type, there's usually no evidence of crash damage, short of a total failure. That means we're given no visible warning of issues, and continue riding a frame that may be compromised. When it ultimately fails, it's hard to trace it back to the earlier event, and we blame the material instead.

Combine that with the underbuilding I mentioned earlier, and you have a recipe for the sudden catastrophic failures that we're seeing.
I think this is it. The real allure of CF is that you can lay it up in ways that make it lighter than other materials. Then you start telling the market that they want light bikes. And the lighter the bike, the better it is and the more money you should pay for it. This ultimately leads to CF frames that are too light and subsequent catastrophic failures.

Originally Posted by FBinNY
Is CF somehow too risky for frames, and yet perfectly reliable and safe for forks?
I think its just a numbers game. Lots of folks know stories of broken CF frames. Very few know of any broken CF fork stories. I don't know anyone that has had a CF fork fail. Maybe the industry overbuilds them to be safe?

Originally Posted by FBinNY
It's perfectly possible to build a CF frame for a 300# rider or even heavier. But that's not what the available frames/bikes are built for.
Agreed. I don't think there is a CF road bike out there that was built with a 250+ lb rider in mind. Many companies have weight limits on their CF bikes in the range of 200-240 lbs max. Ride one at over 250 lbs and it will probably work, but it was never intended to do that and will one day fail if continued to be used in that fashion. We just don't know which day.

Originally Posted by FBinNY
To set the record straight, I wouldn't recommend a superlight steel frame for a heavy rider either.
I hear this said, but wonder what the reality is. What is a specific example of this?

Originally Posted by squirtdad
Anecdotal only. A friend at work is long term bike racer (cat 1) whippet thin. he went through 3 carbon frames (trek or specialized forgot which) that cracked, broke, or had other issues before he noted this never happened when is was steel frames.
Talking to friends about CF is what started the ball rolling to steel frames for me. Talking to seasoned riders and they all brag about breaking CF frames. Cracked this one, snapped that one, etc. Pointing out cracks on current frames that they keeping an eye on. They have the mindset that these frames have short life spans and replace them more frequently. Get new CF every 2-3 years or so.

When I think about CF road bikes, I think about this release from Specialized that applies to their most popular CF road bikes:

HIGH-PERFORMANCE ROAD
• CONDITION 1: Bikes designed for riding on a paved surface where the tires do not lose ground contact.
• INTENDED: To be ridden on paved roads only.
• NOT INTENDED: For off-road, cyclocross, or touring with racks or panniers.
• TRADE OFF: Material use is optimized to deliver both light weight and specific performance.

You must understand
that:
(1) these types of bikes are intended to give an aggressive racer or competitive cyclist a performance advantage
over a relatively short product life,
(2) a less aggressive rider will enjoy longer frame life,
(3) you are choosing light weight
(shorter frame life) over more frame weight and a longer frame life,
(4) you are choosing light weight over more dent
resistant or rugged frames that weigh more.
All frames that are very light need frequent inspection
. These frames are
likely to be damaged or broken in a crash.
They are not designed to take abuse or be a rugged workhorse
Jarrett2 is offline  
Old 07-25-16, 01:08 PM
  #37  
Senior Member
 
squirtdad's Avatar
 
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,856

Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque

Mentioned: 104 Post(s)
Tagged: 0 Thread(s)
Quoted: 2304 Post(s)
Liked 2,741 Times in 1,499 Posts
Originally Posted by Jarrett2
snip

I think its just a numbers game. Lots of folks know stories of broken CF frames. Very few know of any broken CF fork stories. I don't know anyone that has had a CF fork fail. Maybe the industry overbuilds them to be safe?

swip
you used to (3 - 5 years ago) see a fair number of reports of carbon forks failing, often with not good results. Overbuilding would seem to be a logical reaction to that.
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)



squirtdad is offline  
Old 07-25-16, 01:16 PM
  #38  
Senior Member
 
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094

Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2

Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by FBinNY
Again -- it's not the material per se. It's the application, meaning the overall design, construction, and intended purpose.

It's perfectly possible to build a CF frame for a 300# rider or even heavier. But that's not what the available frames/bikes are built for. To set the record straight, I wouldn't recommend a superlight steel frame for a heavy rider either.

High end bikes built for sport, whether metal or CF aren't for heavy riders the same way that sports cars aren't for hauling bricks.
While my initial "jab" was a joke at the argument going on over in general, your response brings up another question. If you frequent the clyde's forum, you'll find that people often recommend older steel mountain bikes for them.

So were bikes built stronger back then?
corrado33 is offline  
Old 07-25-16, 02:47 PM
  #39  
Senior Member
 
Jarrett2's Avatar
 
Join Date: May 2013
Location: DFW
Posts: 4,126

Bikes: Steel 1x's

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 632 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
Originally Posted by corrado33
While my initial "jab" was a joke at the argument going on over in general, your response brings up another question. If you frequent the clyde's forum, you'll find that people often recommend older steel mountain bikes for them.

So were bikes built stronger back then?
My guess is its just a safe recommendation for most. MTB bikes are typically built stronger than road bikes. Steel is considered the most durable material. Hence, steel MTB's for really big first time riders.

My personal recommendation for anyone over 250 lbs that wants a road bike is to go steel, unless they plan on racing.
Jarrett2 is offline  
Old 07-25-16, 02:50 PM
  #40  
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,545

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5703 Post(s)
Liked 2,432 Times in 1,345 Posts
Originally Posted by corrado33
While my initial "jab" was a joke at the argument going on over in general, your response brings up another question. If you frequent the clyde's forum, you'll find that people often recommend older steel mountain bikes for them.

So were bikes built stronger back then?
YES, and NO.

There are inherent differences in various metals and CF, that designers need to factor.

Bicycles are designed around 3 criteria, weight, strength, and ride (flex/rigidity). Leaving weight aside, it's a question of how strength and ride play out with various materials. In most cases, the frame is spec'd around strength, then ride is adjusted by playing with tube diameters and wall thickness, to bring a final result which meets both needs.

But steel is different, high strength steel is too strong, and from a purely strength standpoint it would be possible to use less. But there are limits to wall thickness, so they can't go thinner, nor can they use thinner larger diameter tubing. So in order to dial in ride, they end up using more steel than necessary for strength, ending up with an overbuilt frame.

So, there is some truth to the notion that steel frames are stronger. Combine that with steels ductility, which causes bending before breaking, and you have a higher safety margin.

---------------

There's also another reason CF frames tend to be (or seem) less reliable, and that's in designer to product process controls. In a frame built from metal tubing, the tubing company can exercise very precise control over the product working to close tolerances. Plus the very process of drawing tubing tends to show up any flaws in the material, which will break while processing. So, the only control needed is in the assembly (glue, braze, or weld), and this is pretty easily managed and/or inspected.

Contrast that with CF structures. The makers of the sheets can control what they provide. However, there's much more involved as those sheets are laid up to make a frame, and the potential for error, shortcuts, or poor design choices is greater. It's also more difficult to inspect final product to be sure it meets spec. So the band of variation frame to frame is greater than with joined tubing, and the likelihood of a poor mix like a heavy rider getting a frame at the low end of the range is greater.

IMO - a quality CF frame from a builder with good engineering and controls will be an excellent, safe, long lived product. But other than reliance on the builder's reputation, there's no way a consumer can make a judgement call about what he's buying.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Old 07-25-16, 03:15 PM
  #41  
Senior Member
Thread Starter
 
NYMXer's Avatar
 
Join Date: Oct 2015
Location: Middletown NY
Posts: 1,495

Bikes: Cannondale SuperSix EVO w Hi-Mod frame, Raleigh Tamland 1 and Giant Anthem X

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 352 Post(s)
Likes: 0
Liked 8 Times in 6 Posts
An example of my fears would be that while my road bike is CF, my Mtb is not.... it is alum.

I love the discussion and now realize points of view that I have not considered but that doesn't mean I agree with them yet.
NYMXer is offline  
Old 07-25-16, 09:52 PM
  #42  
Banned
 
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924

Bikes: RANS Stratus TerraTrike Tour II

Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 3352 Post(s)
Liked 1,054 Times in 634 Posts
When you drill down to the bare facts, a so call CF frame is a plastic frame reinforced with CF. Plastic ages rather fast, and is probably the reason for the failures. Add to that all the marketing hype and huge profits, mfg of course are promoting CF frames on a high level.

As some mentioned, the problem probably also lies in the fact that mfg are now making frames that are too light for their own good. Weight weenies are driving this fact.
rydabent is offline  
Old 07-25-16, 11:31 PM
  #43  
Senior Member
 
catgita's Avatar
 
Join Date: Oct 2014
Location: Long Beach
Posts: 765

Bikes: Fitz randonneuse, Trek Superfly/AL, Tsunami SS, Bacchetta, HPV Speed Machine, Rans Screamer

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 100 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
I recall using paper thin MTB and road bars in the early 90s. One crash (hardly more than the bike falling over) and they cracked in two like eggshells. There was much marketing hype and gram counting, and similar talk about safety, and if legal standards were not required to fix the situation. I don't believe you can buy such bars any more.
catgita is offline  
Old 07-25-16, 11:49 PM
  #44  
dim
Senior Member
 
dim's Avatar
 
Join Date: Nov 2015
Location: Cambridge UK
Posts: 1,703

Bikes: Trek Emonda SL6 .... Miyata One Thousand

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 63 Post(s)
Likes: 0
Liked 29 Times in 22 Posts
my take on all this:

buy a c/f bike with a good groupset such as Ultegra or better.... and which has good wheels

ride the crap out of it .... when the frame starts giving problems, buy a new frame and transfer the groupset etc over

a brand new good c/f frame with forks can be bought here in the UK for as little as £350:

Planet X Pro Carbon Road Frameset | Planet X

if you need to change the frame every 3 years, it's not a major issue especially if the price of good c/f frames with forks are becoming cheaper
dim is offline  
Old 07-26-16, 12:50 AM
  #45  
Senior Member
 
Join Date: Mar 2016
Posts: 569
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 242 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I just can't believe how long the CF scam has been going on in the bicycling industry.

It's almost as if bicyclists want to spend as much money as they possibly can for a product which is as dangerous and as unreliable as a manufacturer could make them. Oh wait, no that's exactly what cyclists are doing.

C'mon guys, there must be a few of us who aren't gullible enough to believe that saving 80 grams compared to an aluminum frame is enough of a difference for anyone to notice. Most of us would save more weight just picking the lint out of our navel or shaving our nose hairs.
American Euchre is offline  
Old 07-26-16, 07:35 AM
  #46  
Senior Member
 
Join Date: Oct 2012
Location: Twin Cities, Minnesota, USA
Posts: 1,298

Bikes: 2017 Salsa Carbon Mukluk frame built with XT, 2018 Kona Rove NRB build with Sram Apex 1,2008 Salsa El Mariachi, 1986 Centurion Ironman

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 286 Post(s)
Liked 100 Times in 65 Posts
Originally Posted by American Euchre
I just can't believe how long the CF scam has been going on in the bicycling industry.

It's almost as if bicyclists want to spend as much money as they possibly can for a product which is as dangerous and as unreliable as a manufacturer could make them. Oh wait, no that's exactly what cyclists are doing.

C'mon guys, there must be a few of us who aren't gullible enough to believe that saving 80 grams compared to an aluminum frame is enough of a difference for anyone to notice. Most of us would save more weight just picking the lint out of our navel or shaving our nose hairs.
The only aluminum frame bike I have is a fatbike. I like it fine, as four inches of low psi tires soaks everything up. My other bikes are steel and CF. I've had two aluminum frame road bikes. After every ride I felt like I'd been beaten with a stick. CF is plenty durable for its application (I would not get one for mountain biking) and if you're willing to shop around you won't pay more than a good (if there is such a thing) aluminum frame.
__________________
Don't complain about the weather and cower in fear. It's all good weather. Just different.
revcp is offline  
Old 07-26-16, 08:26 AM
  #47  
Senior Member
 
CrankyNeck's Avatar
 
Join Date: Jul 2016
Location: Panama, close to Pedro Miguel Locks.
Posts: 150

Bikes: Trek 2300

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
I know lots of folks will take issue with this. Don't care. Never do. Here goes. Way too many (and I mean WAY TOO MANY) cyclists and triathletes are overly concerned, some to the point of what I would call paranoia, over weight of frames and components. Sure, you don't want something really heavy when you could go lighter and still maintain safety and durability. But there comes a point when spending big bucks to save a few more grams and sacrifice durability and some measure of safety makes no sense. Manufacturers know there a lot of people out there looking for "the lightest", so they're going to give it to them. It makes them money. Perhaps if more people were a little less concerned with getting a frame that weighs less than their morning bowl of oatmeal the manufacturers wouldn't have to come so close to that bad place of frame failure and/or short life. Let the pros worry about getting the lightest things out there. Most of us should worry more about tuning the engine, because that will always be the most important aspect.
CrankyNeck is offline  
Old 07-26-16, 08:55 AM
  #48  
Senior Member
Thread Starter
 
NYMXer's Avatar
 
Join Date: Oct 2015
Location: Middletown NY
Posts: 1,495

Bikes: Cannondale SuperSix EVO w Hi-Mod frame, Raleigh Tamland 1 and Giant Anthem X

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 352 Post(s)
Likes: 0
Liked 8 Times in 6 Posts
Originally Posted by CrankyNeck
Let the pros worry about getting the lightest things out there. Most of us should worry more about tuning the engine, because that will always be the most important aspect.
I can only wish that one day I will be athletically good enough that a few grams of bike weight will affect my performance, lol..... in the mean time, I will continue to work on my abilities rather than seek expensive short cuts.

Besides, there is a thing called "enjoying the ride" and while that is a vague term covering a whole lot of area, for me, it means I should not forget why I ride in the first place, to get out and enjoy an honest workout and even better if a few friends join in. When I feel like turning up the heat, I will and when I don't, there are lot's of things to witness and take in when riding a bike.

About a year ago, I started cycling on my $400 Mercier Galaxy, a alum framed carbon fork, Claris drive train cheap bike from BD. My Strava times are no slower on that bike than my CF Cannondale, so the rider is more the variable than the bike in my opinion.
NYMXer is offline  
Old 07-26-16, 09:42 AM
  #49  
Friendship is Magic
 
3alarmer's Avatar
 
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,932

Bikes: old ones

Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26250 Post(s)
Liked 10,231 Times in 7,100 Posts
Originally Posted by NYMXer
Some members advice is better than others...
...hey now. Hurtful.
3alarmer is offline  
Old 07-26-16, 09:55 AM
  #50  
Rubber side down
 
Clipped_in's Avatar
 
Join Date: Mar 2011
Location: Teh Quickie Mart
Posts: 1,769

Bikes: are fun! :-)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 225 Times in 105 Posts
Originally Posted by Ball Bearing
I've never seen a carbon frame bend like a fishing pole. I think there is a huge difference.
^^^^True. Fly rods and bike frames are not a very good comparison. Because their function is so totally different, they are two very different types of structures. A bike frame is by nature much more impact resistant.

At least nobody has suggested that exposure to water is going to cause a carbon bike frame to fail like what would happen just a few years ago in one of these discussions. The fishing rod comparison does at least put that one to rest.
Clipped_in is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.