Any Cannondale slice experts out there?
#1
Junior Member
Thread Starter
Join Date: Sep 2016
Location: North San Diego
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Any Cannondale slice experts out there?
I have a huge problem with a slice rs I am trying to rewire. Basically, the internal cable routing system has been destroyed by a previous mechanic. Parts are no longer available from Cannondale so looking for a McGiver fix. If you look at the schematics, lines 4 thru 7 are either destroyed or missing. Thanks, Mark
#2
Junior Member
Thread Starter
Join Date: Sep 2016
Location: North San Diego
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Alright, here's what I know about this bike so far:
2013 Cannondale slice RS.
Sent directly to the rider in rural Brazil, from Cdale on a pro riderdeal.
Built by the only guy around with a set of tools, (not a bike mech.) in a hurry a couple days before a race.
The big problem is over the years of her riding 400+ miles per week, each mech. who's worked on it has only put bandaids on it and not fixed the core problem. Now parts are unavailable so all I can do is try to build a better bandaid.
2013 Cannondale slice RS.
Sent directly to the rider in rural Brazil, from Cdale on a pro riderdeal.
Built by the only guy around with a set of tools, (not a bike mech.) in a hurry a couple days before a race.
The big problem is over the years of her riding 400+ miles per week, each mech. who's worked on it has only put bandaids on it and not fixed the core problem. Now parts are unavailable so all I can do is try to build a better bandaid.
#3
Senior Member
Join Date: Aug 2007
Posts: 2,595
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 608 Post(s)
Liked 352 Times
in
225 Posts
You will have to post a bigger photo or put it on a photo sharing website and link back. Alternatively you could post a link to the document you need. At the moment it is difficult to see what parts you are talking about. Good luck with your fix.
#5
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,666
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 836 Post(s)
Liked 1,060 Times
in
744 Posts
Have you tried contacting Cannondale USA directly? 3 years old and I would be surprised if they stopped supplying those parts for this bike. Shame on them if they don't. I'm sure it would be possible to improvise with a good solution but not having it in front of me it's hard to recommend something. Oh, the joys of proprietary bike parts.
#6
Junior Member
Thread Starter
Join Date: Sep 2016
Location: North San Diego
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have you tried contacting Cannondale USA directly? 3 years old and I would be surprised if they stopped supplying those parts for this bike. Shame on them if they don't. I'm sure it would be possible to improvise with a good solution but not having it in front of me it's hard to recommend something. Oh, the joys of proprietary bike parts.