Issues with my brand new Domane
#1
Newbie
Thread Starter
Join Date: Sep 2016
Posts: 2
Bikes: Trek 7.5FX, Trex Domane SL6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Issues with my brand new Domane
Hi guys,
I'm the lucky new owner (for a couple of days) of a Trek Domane SL6. Since I'm still waiting for my new shoes to be delivered, I didn't seriously rode this bike so far, except some hundred yards in front of my home. But I already noticed two so called "issues".
1. Front derailleur on the biggest chainwheel and rear derailleur set on the last 5 or 6 smallest sprockets (right side of the cassette), the chain is not driving smoothly. Some vibrations are noticed, like if the chain was "gripping" on the cassette. I tried to remove and put back the rear wheel in order to align everything together. It was a little better, but didn't solve it perfectly. Maybe I should ride the bike for a while and wait for everything to work together.
2. Rear derailleur set on speed 8-9 to 11 (far right of the cassette), as I push hard on the pedals (or when I'm standing up on them), I noticed a friction from the front derailleur (most likely) or the crankset on each pedal revolution. This friction doesn't exist when I pedal normally.
So any clue? Thanks.
I'm the lucky new owner (for a couple of days) of a Trek Domane SL6. Since I'm still waiting for my new shoes to be delivered, I didn't seriously rode this bike so far, except some hundred yards in front of my home. But I already noticed two so called "issues".
1. Front derailleur on the biggest chainwheel and rear derailleur set on the last 5 or 6 smallest sprockets (right side of the cassette), the chain is not driving smoothly. Some vibrations are noticed, like if the chain was "gripping" on the cassette. I tried to remove and put back the rear wheel in order to align everything together. It was a little better, but didn't solve it perfectly. Maybe I should ride the bike for a while and wait for everything to work together.
2. Rear derailleur set on speed 8-9 to 11 (far right of the cassette), as I push hard on the pedals (or when I'm standing up on them), I noticed a friction from the front derailleur (most likely) or the crankset on each pedal revolution. This friction doesn't exist when I pedal normally.
So any clue? Thanks.
#2
Senior Member
Join Date: Feb 2014
Location: Pasadena, CA
Posts: 4,848
Bikes: Schwinn Varsity
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1931 Post(s)
Liked 742 Times
in
422 Posts
Hello. I hope you chain does grip the cassette. Ha.
You probably need some minor shift cable adjustment. New cables will stretch a bit.
Same with front deraileur rub .... minor adjustment needed for your mighty 400 watts of power which is flexing the frame.
You probably need some minor shift cable adjustment. New cables will stretch a bit.
Same with front deraileur rub .... minor adjustment needed for your mighty 400 watts of power which is flexing the frame.
#3
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,695
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5774 Post(s)
Liked 2,571 Times
in
1,423 Posts
Your problems are 100% normal. The cassette is fairly wide and the chain will move sideways within the FD cage as it comes from various angles in the rear.
There is a "trim" shift built into the FD shifter. It's the first click coming off the high gear position and moves the FD cage inboard a millimeter or two to accommodate the chain coming from a more inboard angle.
So, full high on the outer end of the cassette, and "trim" high when on the inner half or so.
There is a "trim" shift built into the FD shifter. It's the first click coming off the high gear position and moves the FD cage inboard a millimeter or two to accommodate the chain coming from a more inboard angle.
So, full high on the outer end of the cassette, and "trim" high when on the inner half or so.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
Thread
Thread Starter
Forum
Replies
Last Post
2 wheeler
Bicycle Mechanics
11
10-03-13 06:53 PM