Front derailleur grip shift stuck
#1
Junior Member
Thread Starter
Join Date: May 2017
Location: East Ayrshire, Scotland
Posts: 13
Bikes: Crap bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Front derailleur grip shift stuck
I cannot shift the front derailleur using the grip shift on my cheapo Dunlop Sport (sport?). I have removed the outer grip but not sure how to take the shifter apart. I am still in the dark ages when down tube shifters were the best thing since sliced bread was invented. I also need to replace the rear derailleur and chain. Cannot afford much so can anyone recommend any?
Thanks
Brian
Thanks
Brian
#2
Senior Member
Join Date: Oct 2015
Location: Middletown NY
Posts: 1,493
Bikes: Cannondale SuperSix EVO w Hi-Mod frame, Raleigh Tamland 1 and Giant Anthem X
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 352 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
Twist grips shifters are cheap, about $12 inc the cable..... just replace it
#3
Banned
+1, With cheap grip shifters that may be your only option. toss them fit a new one. (other than a friction thumb shifter..)
#4
The Infractionator
Join Date: Mar 2016
Location: Rochester, NY
Posts: 2,201
Bikes: Classic road bikes: 1986 Cannondale, 1978 Trek
Mentioned: 9 Post(s)
Tagged: 1 Thread(s)
Quoted: 875 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I once tried taking apart a cheap plastic grip shifter; fell apart into a bunch of small, unrepairable plastic bits. Just buy a new one....
#5
Junior Member
Thread Starter
Join Date: May 2017
Location: East Ayrshire, Scotland
Posts: 13
Bikes: Crap bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for your replies. A new one it is then, I might as well get both. Does anyone have any info on a Ventura Rear Derailleur? Are they any good?
Thanks
Brian
Thanks
Brian
#7
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,071
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4199 Post(s)
Liked 3,851 Times
in
2,301 Posts
There are a few different versions of brand named Grip Shifters and other knock offs too. Some of the knock offs are not designed to even allow cable replacement. All the Grip Shift ones can be pulled apart, but how is version dependent. Grip Shift ones have a common failure of the internal spring cavity. We regard them as disposable. Just make sure you get the right compatibility WRT the rear der brand. Andy
#8
Junior Member
Thread Starter
Join Date: May 2017
Location: East Ayrshire, Scotland
Posts: 13
Bikes: Crap bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#9
Junior Member
Thread Starter
Join Date: May 2017
Location: East Ayrshire, Scotland
Posts: 13
Bikes: Crap bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Found some grip shifters on ebay for around £8 a pair (about $10.5). Comes with inner and outer cables. Must be worth a try, cannot be worse that what I already have (can they?)
Cheers
Brian
Cheers
Brian
Last edited by meddyliol; 05-21-17 at 01:32 AM. Reason: Added text
#10
Junior Member
Thread Starter
Join Date: May 2017
Location: East Ayrshire, Scotland
Posts: 13
Bikes: Crap bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Just ordered a pair of Microshift branded grip shifters from Amazon at £9.46. They seem to have good reviews.
Thread
Thread Starter
Forum
Replies
Last Post
Rick7A
Bicycle Mechanics
8
08-05-18 08:53 PM
nuclear_biker
Bicycle Mechanics
19
05-18-15 10:46 AM