Chain Whip substitute?
Ok, I blew 8 bucks on a cassette tool, but I just can't put down another 35 for a chain whip. I know one is useless without the other, but the Park Chain Whip must weigh well over a pound, is expensive, and bulky.
Is there any way I can remove my cassette to get to future busted spokes without having a chain whip with me? Has anyone ever used something in place of a chain whip or is there just no substitute? Dave |
i'm not sure if you can remove the cassette w/o the chain whip. I know it sux..but you can always find a cheaper brand than the Park one. Or, you could try to make one if you're really strapped for cash. Just use some extra chain links (if you have any) and copy the design of the Park one. I'm not sure if there's another way other than using the chainwhip...good luck.
|
There used to be a small tool called a Hypercracker, made by Pamyr that undid the locknut, on the bike with no chaintool required. It was a must-have tool, but the company went bust.
Anyone know if the tool is still around ? |
Dwagenheim. do you carry a small vise grip 4or5"? Clamp a bit of chain in the vise grip and use it as your whip.
|
Originally posted by MichaelW There used to be a small tool called a Hypercracker, made by Pamyr that undid the locknut, on the bike with no chaintool required. It was a must-have tool, but the company went bust. Anyone know if the tool is still around ? |
I fashioned a makeshift chainwhip by taking a piece of aluminum bar stock 3/16" thick x 1 1/2" w x 4 1/2" long and drilling holes in it so I could arrange chains on it similar to a chain whip. It weighs very little, fits in my under seat pack and does the job in a pinch.
My new roadbike came with a crappy wheelset and was breaking at least 1 spoke every ride. This tool, a cogset remover, a spoke wrench and carrying spare spokes always got me home. |
I have the Pamir Engineering hypercracker in my toolbox and carry it when on tour. It's a nifty little tool and does its job well. It actually takes the place of a chainwhip, cassette lockring tool, and wrench. It is perfect for the road though I don't think it's a suitable substitute for a chain whip in your home toolkit. You might be able to find one as new old stock at a bike shop. It is certainly worth looking for.
|
Originally posted by ljbike Dwagenheim. do you carry a small vise grip 4or5"? Clamp a bit of chain in the vise grip and use it as your whip. |
35 BUCKS? I got one from Nashbar for about $8, and since I was ordering other stuff the shipping was no big deal. I think they list it as a sprocket removal tool. The vice grips and a length of chain sounds like a great idea. You only need the chainwhip for a second, just to break the lockring loose. In a pinch I have managed just by using a wooden dowel, board or other non-marring item stuck in the space between two teeth and blocked by the chain stay with a rag or something for protection. DON"T apply so much pressure you damage anything. If it doesn't loosen pretty easily, STOP and try something else. Just about anything that allows you to block the cassette from turning, without damaging anything like a spoke or the frame, will work. I think I've even gotten enough grip just by hooking a tooth with the hole at the base of an adjustable wrench handle. It shouldn't take too much unless whoever put it on went all King Kong on the lockring. When you replace the cassette it's not necessary to tighten the lockring extremely, just get it good and snug with what might be termed moderate pressure.
FWIW, Raymond |
Pedro's makes a cog wrench, neatO, see it here
:beer: |
Originally posted by ljbike Dwagenheim. do you carry a small vise grip 4or5"? Clamp a bit of chain in the vise grip and use it as your whip. Anders K |
old chain and vice grip - pretty straightforward
|
Used the visegrip/old chian method for years with perfect results. I finally did end up buying the cheapo Nashbar one recently, it's performed great. After all , it's just a hunk of chain and a handle, pretty low tech.
|
Harris Cyclery sells a nifty little tool that will loosen your cassette lockring without need for the chainwhip or the regular lockting tool.
|
Throw a rag on the cassette to protect your hand, grab the cassette and unscrew the lock ring with the other hand. It has always worked for me.
|
There's also the Dutch "NextBestThing 2" which is one piece and as such easier to use (ok, the difference is tiny) than the lockring tool Harris Cyclery sells. No chainwhip / lockring tool needed with the NBT2 either.
--J |
Originally Posted by Dirtdrop
Throw a rag on the cassette to protect your hand, grab the cassette and unscrew the lock ring with the other hand. It has always worked for me.
|
I've got a couple homemade ones that consist of old, worn out chains run through old handlebars(one steel, one aluminum). Loop the chain around a cog on the cassette, butt the end of the handlebar on one of the teeth so the chain's taut, and hold. Both mine are uncut, but I'm sure they could be cut down to carry on rides.
|
Originally Posted by tgarcia2
That's it there. I heard of that one for the first time from sydney, and I'm surprised it didn't arise earlier in the discussion. So simple, but easily overlooked as a possibility.
I edited my post because I realized that it read like I snapped a tendon removing the cassette. |
Is this for repairs during your ride? Fiberfix is a kevlar replacement spoke for replacing on the road. You don't need to remove the cassette. I've never used it, but it gets great reviews.
|
I have heard that some chain whip substitutes may contain synthetic ingredients that have been shown to cause cancer in laboratory animals.
|
i have an unconventional design that I made without really looking at a chainwhip and having used one only once before. I cut off a hockey stick and wrapped a piece of chain around the end and screwed to each side, then screwed a piece of chain to the side. it works. But I think I will get a lenght of some beat up alluminum ruller and make a park tool look alike.
|
Heres one for $9.00. http://www.pricepoint.com/detail/145...et-Remover.htm
|
In the past I've used a rag around the cassette and held it tight with large channel lock pliers.
|
Originally Posted by cyclotoine
i have an unconventional design that I made without really looking at a chainwhip and having used one only once before. I cut off a hockey stick and wrapped a piece of chain around the end and screwed to each side, then screwed a piece of chain to the side. it works. But I think I will get a lenght of some beat up alluminum ruller and make a park tool look alike.
Is there anything Canadians can't do with an old hockey stick? True story, the CN tower in Toronto is actually made of old hockey sticks. |
All times are GMT -6. The time now is 01:23 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.